BZW06_06 Datasheet, PDF (1/4 Pages) Taiwan Semiconductor Company, Ltd – 600 Watts Transient Voltage Suppressor Diodes

BZW06 SERIES
600 Watts Transient Voltage Suppressor Diodes
DO-15
Features
UL Recognized File # E-96005
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Exceeds environmental standards of MIL-STD-19500
600W surge capability at 10 x 100 us waveform, duty
cycle: 0.01%
Excellent clamping capability
Low zener impedance
Fast response time: Typically less than 1.0ps from
0 volts to VBR for unidirectional and 5.0 ns for
bidirectional
Typical I_R less than 1uA above 10V
High temperature soldering guaranteed: 260^oC / 10
seconds / .375”,(9.5mm) lead length / 5lbs.,(2.3kg)
tension
Mechanical Data
Dimensions in inches and (millimeters)
Case: Molded plastic
Lead: Axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode except bipolar
Weight: 0.34gram
Maximum Ratings and Electrical Characteristics (T_A = 25 ^oC)
Type Number
Symbol
Value
Peak Pulse Power Dissipation at TA=25^oC, Tp=1ms (Note)
Steady State Power Dissipation at TL=75 ^oC
Lead Lengths .375”, 9.5mm (Note 2)
P_PP
Minimum 600
P_D
1.7
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 3)
I_FSM
100
Junction to leads
Junction to ambient on printed circuit.
L lead=10mm
R_θJL
R_θJA
60
100
Operating and Storage Temperature Range
T_J, T_STG
-65 to + 175
Notes: For a surge greater than the maximum values, the diode will fall in short-circuit.
Units
Watts
Watts
Amps
o_C/W
o_C/W
o_C
Version: A06