1W005M Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – Single Phase 1.0 AMP. Silicon Bridge Rectifiers

1W005M THRU 1W10M
Features
Single Phase 1.0 AMP. Silicon Bridge Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.0 Ampere
WOB
UL Recognized File # E-96005
Surge overload ratings to 30 amperes
peak
Ideal for printed circuit board
Reliable low cost construction technique
results in inexpensive product
High temperature soldering guaranteed:
260℃ / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs. ( 2.3 Kg ) tension
Mechanical Data
Case: Molded plastic
Lead: Solder plated
Polarity: As marked
Weight: 1.10 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol 1W 1W 1W 1W 1W 1W 1W Units
005M 01M 02M 04M 06M 08M 10M
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified
Current @TA = 50℃
I(AV)
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
Load (JEDEC method )
50 100 200 400 600 800 1000 V
1.0
A
30
A
Maximum Instantaneous Forward Voltage
@ 1.0A
VF
1.0
V
Maximum DC Reverse Current
@ TA=25℃ at Rated DC Blocking Voltage
IR
@ TA=100℃
10
uA
500
uA
Typical Thermal Resistance (Note)
RθJA
RθJL
36
13
℃/W
Operating Temperature Range
TJ
-55 to +125
℃
Storage Temperature Range
TSTG
-55 to +150
℃
Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on
P.C.B. with 0.2 x 0.2” (5 x 5mm) Copper Pads.
- 660 -