1SMA5926 Datasheet, PDF (1/4 Pages) Taiwan Semiconductor Company, Ltd – Surface Mount Silicon Zener Diode

1SMA5926 THRU 1SMA5945
Surface Mount Silicon Zener Diode
Features
Voltage Range
11 to 68 Volts
1.5 Watts Peak Power
SMA/DO-214AC
For surface mounted applications in order to optimize
board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
Typical IR less than 0.5μA above 11V
High temperature soldering guaranteed:
260^OC / 10 seconds at terminals
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Mechanical Data
Case: Molded plastic over passivated junction
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Color Band denotes positive end (cathode)
Standard packaging: 12mm tape (EIA-481)
Weight: 0.002 ounces, 0.064 gram
.062(1.58)
.050(1.27)
.111(2.83)
.090(2.29)
.187(4.75)
.160(4.06)
.091(2.30)
.078(1.99)
.056(1.41)
.035(0.90)
.008(.20)
.004(.10)
.210(5.33)
.195(4.95)
.012(.31)
.006(.15)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Type Number
DC Power Dissipation at T_L=75^OC,
measure at Zero Lead Length (Note 1)
Derate above 75 ^OC
Symbol
P_D
Value
1.5
20
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2)
I_FSM
10.0
Operating and Storage Temperature Range
T_J, T_STG
Notes: 1. Mounted on 5.0mm² (0.013mm thick) land areas.
-55 to + 150
2. Measured on 8.3ms Single Half Sine-wave or Equivalent Square Wave,
Duty Cycle=4 Pulses Per Minute Maximum.
Units
Watts
mW/ ^OC
Amps
O_C
- 814 -