1SMA4741_1 Datasheet, PDF (1/4 Pages) Taiwan Semiconductor Company, Ltd – 1.0 Watts Surface Mount Silicon Zener Diode

1SMA4741 - 1SMA200Z
1.0 Watts Surface Mount Silicon Zener Diode
SMA/DO-214AC
Features
For surface mounted applications in order to
optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
Typical IR less than 5.0uA above 11V
High temperature soldering guaranteed:
260^oC / 10 seconds at terminals
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Mechanical Data
Dimensions in inches and (millimeters)
Case: Molded plastic over passivated junction
Terminals: Pure tin plated lead free,
solderable per MIL-STD-750, Method 2025
Polarity:Color Band denotes positive end
(cathode)
Standard packaging: 12mm tape (EIA-481)
Weight: 0.002 ounces, 0.064 gram
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Type Number
Symbol
Value
Units
Peak Power Dissipation at TA=50^oC, Derate above
50 ^oC ( Note 1 )
P_D
1.0
6.67
Watts
mW/ ^oC
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) ( Note 2 )
I_FSM
10.0
Amps
Operating and Storage Temperature Range
T_J, T_STG
-55 to + 150
o_C
Notes: ^{1. Mounted on 5.0mm2 (0.013mm thick) land areas.}
2. Measured on 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per
Minute Maximum
- 586 -
Version: B07