1N5391G Datasheet, PDF (1/2 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF GLASS PASSIVATED RECTIFIER

1N5391G THRU 1N5399G
Features
1.5 AMPS. Glass Passivated Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.5 Amperes
DO-15
a Low forward voltage drop
a High current capability
a High reliability
a High surge current capability
Mechanical Data
a Cases: Molded plastic
a Epoxy: UL 94V-0 rate flame retardant
a Lead: Axial leads, solderable per MIL-STD-
Lead: 202, Method 208 guaranteed
a Polarity: Color band denotes cathode end
a High temperature soldering guaranteed:
250°C/10 seconds/.375”,(9.5mm) lead
lengths at 5 lbs.,(2.3kg) tension
a Weight: 0.40 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
1N
1N
1N
1N
1N
5391G 5392G 5393G 5395G 5397G
Maximum Recurrent Peak Reverse Voltage
50 100 200 400 600
Maximum RMS Voltage
35 70 140 280 420
Maximum DC Blocking Voltage
50 100 200 400 600
Maximum Average Forward Rectified Current
.375”(9.5mm) Lead Length @TA = 60°C
1.5
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
50
(JEDEC method )
Maximum Instantaneous Forward Voltage
1.1
1.0
@1.5A
Maximum DC Reverse Current @ TA=25°C
at Rated DC Blocking Voltage @ TA=125°C
5.0
100
Typical Junction Capacitance ( Note )
30
Operating and Storage Temperature Range
- 65 to + 150
TJ,TSTG
Note: Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
1N
5398G
800
560
800
1N _Units
5399G
1000 V
700 V
1000 V
A
A
V
uA
uA
pF
°C
- 312 -