1N4933G Datasheet, PDF (1/2 Pages) Rectron Semiconductor – FAST RECOVERY GLASS PASSIVATED RECTIFIER

1N4933G THRU 1N4937G
Features
1.0 AMP. Glass Passivated Fast Recovery Rectifiers
Voltage Range
50 to 600 Volts
Current
1.0 Ampere
DO-41
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Cases: Molded plastic DO-41
Epoxy: UL 94V-O rate flame retardant
Lead: Axial leads, solderable per MIL-
STD-202, Method 208 guaranteed
Polarity: Color band denotes cathode end
High temperature soldering guaranteed:
260^oC/10 seconds/.375”,(9.5mm) lead
lengths at 5 lbs., (2.3kg) tension
Weight: 0.34gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol 1N
1N
1N
1N
4933G 4934G 4935G 4936G
Maximum Recurrent Peak Reverse Voltage
V_RRM
50
100 200 400
Maximum RMS Voltage
V_RMS
35
70 140 280
Maximum DC Blocking Voltage
V_DC
50
100 200 400
Maximum Average Forward Rectified Current
.375 (9.5mm) Lead Length @TA = 75℃
I_(AV)
1.0
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load _IFSM
30
(JEDEC method )
Maximum Instantaneous Forward Voltage
@ 1.0A
V_F
1.2
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=125℃
I_R
5.0
100
Maximum Reverse Recovery Time ( Note 1 )
Trr
200
Typical Junction Capacitance ( Note 2 )
Cj
10
Typical Thermal Resistance (Note 3)
RθJA
65
Operating Temperature Range
TJ
-65 to +150
Storage Temperature Range
TSTG
-65 to +150
Notes: 1. Reverse Recovery Test Conditions: IF=1.0A, VR=30V, di/dt=50A/uS, Irr=10%
IRM for Measurement of trr.
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C.
3. Mount on Cu-Pad Size 5mm x 5mm on P.C.B.
1N
4937G
600
420
600
Units
V
V
V
A
A
V
uA
uA
nS
pF
℃/W
℃
℃
- 440 -