1N4001G Datasheet, PDF (1/2 Pages) NXP Semiconductors – Rectifiers(Rugged glass package, using a high temperature alloyed construction)

1N4001G THRU 1N4007G
Features
1.0 AMP. Glass Passivated Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.0 Ampere
DO-41
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Cases: Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: Axial leads, solderable per MIL-STD-
202, Method 208 guaranteed
Polarity: Color band denotes cathode end
High temperature soldering guaranteed:
260℃/10 seconds/.375”,(9.5mm) lead
lengths at 5 lbs.,(2.3kg) tension
Weight: 0.34 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol 1N 1N 1N 1N 1N 1N 1N Units
4001G 4002G 4003G 4004G 4005G 4006G 4007G
Maximum Recurrent Peak Reverse
Voltage
V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current .375”(9.5mm) Lead Length
@TA = 75℃
V_DC 50 100 200 400 600 800 1000 V
I_(AV)
1.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
30
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@1.0A
V_F
1.0
V
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=125℃
I_R
5.0
uA
100
uA
Typical Junction Capacitance ( Note 1 )
Typical Thermal Resistance (Note 2)
Cj
RθJA
10
pF
65
O_C/W
Operating and Storage Temperature Range T_J,T_STG
- 65 to + 150
℃
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
2. Mount on Cu-Pad Size 5mm x 5mm on P.C.B.
- 534 -