1.5SMC_1 Datasheet, PDF (1/4 Pages) Taiwan Semiconductor Company, Ltd – 1500 Watts Surface Mount Transient Voltage Suppressor

1.5SMC SERIES
1500 Watts Surface Mount
Transient Voltage Suppressor
SMC/DO-214AB
.124(3.15)
.112(2.85)
.245(6.22)
.220(5.59)
Features
For surface mounted application in order to optimize
board space
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps from 0
volt to BV min.
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
260^oC / 10 seconds at terminals
Plastic material used carries Underwriters Laboratory
Flammability Classification 94V-0
1500 watts peak pulse power capability with a 10 x
1000 us waveform by 0.01% duty cycle
.280(7.11)
.260(6.60)
.012(.31)
.006(.15)
.103(2.62)
.079(2.00)
.071(1.8)
.039(1.0)
.008(.20)
.004(.10)
.320(8.13)
.305(7.75)
Dimensions in inches and (millimeters)
Mechanical Data
Case: Molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode band
Standard packaging: 16mm tape (EIA STD RS-481)
Weight: 0.21gram
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Type Number
Peak Power Dissipation at TA=25^oC, Tp=1ms (Note 1)
Power Dissipation on Intinite Heatsink, T_A=50^oC
Peak Forward Surge Current, 8.3 ms Single Half
Symbol
P_PK
P_M(AV)
Value
Minimum 1500
6.5
Units
Watts
W
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2, 3) - Unidirectional Only
I_FSM
200
Amps
Thermal Resistance Junction to Ambient Air (Note 4)
RθJA
50
o_C/W
Thermal Resistance Junction to Leads
RθJL
15
o_C/W
Operating and Storage Temperature Range
T_J, T_STG
-55 to + 150
o_C
Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25^oC Per Fig. 2.
2. Mounted on 8.0mm² (.013mm Thick) Copper Pads to Each Terminal.
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute
Maximum.
4. Mounted on 5.0mm²(.013mm thick) land areas.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types 1.5SMC6.8 through Types 1.5SMC200A.
2. Electrical Characteristics Apply in Both Directions.
- 546 -
Version: A06