TWM15 Datasheet, PDF (1/2 Pages) Tumbler Technologies + TRUMPower – Medical Grade 15W Wall Mount Power Adapters

TRUMPower
TWM15 Series
Medical Grade 15W Wall Mount Power Adapters
FEATURES
• 90~264 VAC Universal Input
• Class II Insulation
• Standby Power Consumption < 0.3W
• Interchangeable and Fixed Plugs Available
• Meet CEC and Energy Star Efficiency Level V
INPUT SPECIFICATIONS
Input Voltage Range ................. 90~264 VAC
Input Frequency ........................ 47~63Hz
Input Current ............................. 0.5A rms @ 115 VAC
0.3A rms @ 230 VAC
Inrush Current .......................... 30A @115 VAC or 60A @ 230 VAC
(except 80A for 5V output) at 25°C
cold start
Enclosure Leakage Current ..... 100 μA max. @ 264 VAC, 63Hz
OUTPUT SPECIFICATIONS
Output Power ....................... 15W max.
Output Voltage ..................... See table
Output Current ..................... See table
Ripple and Noise* ............... 1% p-p max., except 70 mVp-p
on 5V with interchangeable plug
Overvoltage Protection ........ Set at 116-230% of its nominal
output voltage
Overcurrent Protection ........ Protected to short-circuit conditions
Transient Response ........... Max. excursion of 4% or better on all
models, recovering to 1% of final
value within 500 μs after a 25%
step load change
* Measured with 20MHz bandwidth at rated line voltage and output load ranges, with
a 47 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor in parallel
across the output.
GENERAL SPECIFICATIONS
Efficiency ............................. See rating chart
Hold-up Time ....................... 8 ms min. @ 115 VAC
Turn-on Delay Time ............. 3 seconds max. @ 115 VAC
Line Regulation ................... ±0.5% max. at full load
Operating Temperature ...... 0°C to +40°C
Derating ............................... Derate from 100% at +40°C linearly
to 50% at +60°C
Storage Temperature .......... -40°C to +85°C
Temperature Coefficient ..... ±0.04%/°C max.
Relative Humidity ................ 10% to 90% non-condensing
Withstand Voltage ............... 4,000 VAC from input to output
MTBF .................................... 300K hours minimum at full load,
25°C ambient, calculated per
MIL-HDBK-217F
MODELS LIST
Max.
Active Efficency
Output Output
Ripple &
*Product No. Voltage Current Tol. Noise @ 115 VAC @ 230 VAC
TWM15-05-X
5V
3A
±5% 70mV
78%
77%
TWM15-06-X
6V
2.5A ±5% 60mV
80%
78%
TWM15-09-X
9V
1.67A ±5% 90mV
82%
80%
TWM15-12-X
12V
1.25A ±5% 120mV
82%
80%
TWM15-15-X 15V
1A
±5% 150mV
83%
80%
TWM15-24-X 24V 0.625A ±5% 240mV
85%
81%
*X = AC plug code. See below tables and drawings for details.
X
Fixed Type of AC Plug
E
EU Plug
U
USA Plug, Polarized
UN
USA Plug, Non-Polarized
*I *Interchangeable "main body" without AC plug
P/N
*Interchangable AC Plug
IPB
British/UK Plug
IPE
EU Plug
IPU
USA Plug (for 115V socket)
IPUH
USA Plug (for 230V socket)
*Must order with the interchangeable "main
body" such as TWM15-05-I, etc.
STANDARDS & COMPLIANCES
IEC 60601-1-2 ................... EMC & Immunity performance
EN 55011, FCC, VCCI ....... Class B, conducted & radiated
EN 61000-3-2 .................... Harmonic distortion, Class A & D
EN 61000-3-3 .................... Line flicker
EN 61000-4-2 .................... ESD, ±8KV air and ±6KV contact
EN 61000-4-3 .................... Radiated immunity, 3V/m
EN 61000-4-4 .................... Fast transient/burst, ±2KV
EN 61000-4-5 .................... Surge, ±1KV diff., ±2KV com.
EN 61000-4-6 .................... Conducted immunity, 3 Vrms
EN 61000-4-8 .................... Magnetic field immunity, 3A/m
EN 61000-4-11 .................. Voltage dip immunity,
30% reduction for 500 ms,
60% reduction for 100 ms,
>95% reduction for 10 ms
Safety Standards ............... UL 60601-1, EN 60601-1
CSA C22.2 No. 601.1
Agency Approvals .............. UL, cUL, TUV, CE (LVD)
Other Compliances .......... RoHS, CEC & Energy Star Level V
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Building 13 • Santa Clara, California 95054, USA • 408-988-6616 • [e-mail] • www.TRUMPower.com