TMC100-S05 Datasheet, PDF (1/2 Pages) Tumbler Technologies + TRUMPower – 100 WATT MEDICAL & ITE SWITCHING POWER SUPPLIES

TRUMPower
100 WATT MEDICAL & ITE SWITCHING POWER SUPPLIES
DESCRIPTION
The TMC100 series of compact, open PCB constructed, AC-DC
switching power supplies are capable of delivering 100 watts of
continuous output power at convection. They operate at 90-264 VAC
input voltage without the need of voltage selection, and are suited for
medical, information technology and industrial applications. Approval
to both EN 60601-1 and EN 60950-1 safety standards improves
design-in time and reduces end equipment compliance costs.
FEATURES
z Medical and ITE approvals
z Compact size 2” × 4” × 1.26”
z Ultra high power density 10 W/cubic inch
z Full range input 90-132 VAC, or 180-264 VAC
z Low earth leakage current
z Conducted EMI class B
z RoHS compliant
INPUT SPECIFICATIONS
Input voltage:
90-132 VAC or 180-264 VAC
Input frequency:
47-63 Hz
Input current:
1.9A (rms) for 100-120 VAC
1.0A (rms) for 200-240 VAC
Earth leakage current: 150 µA max. @ 264 VAC, 63 Hz
TMC100 SERIES
SAFETY STANDARD APPROVALS
UL 60601-1
CSA C22.2 No. 601.1
TÜV EN60601-1
OUTPUT SPECIFICATIONS
Output voltage/current: See rating chart
Total output power:
100 watts maximum
Ripple and noise:
250 mV peak to peak on 5.0 V model ,
1% peak to peak on other models.
Overvoltage protection: Provided on output; set at 110-140% of its
nominal output voltage
Overcurrent protection: All outputs protected to short circuit
conditions
Temperature coefficient: All outputs ±0.04% /^oC maximum
Transient response:
Maximum excursion of 4% or better on all
models, recovering to 1% of final value
within 500 µs after a 25% step load
change
ENVIRONMENTAL SPECIFICATIONS
Operating temperature:
Storage temperature:
-10^oC to +70^oC
-40^oC to +85^oC
Relative humidity:
Derating:
5% to 95% non-condensing
Derate from 100% at +50^oC linearly to
50% at +70^oC
Cooling:
Convection cooling
GENERAL SPECIFICATIONS
Switching frequency:
Efficiency:
Hold-up time:
Line regulation:
Inrush current:
Withstand voltage:
MTBF:
EMC Performance
EN55011 / EN55022:
FCC:
VCC:
EN61000-3-2:
EN61000-3-3:
EN61000-4-2:
EN61000-4-3:
EN61000-4-4:
EN61000-4-5:
EN61000-4-6:
EN61000-4-8:
EN61000-4-11:
100 KHz
87-90% @ 230 VAC full load.
12 msec minimum at 110 VAC.
±0.2% maximum at full load
40 A @ 115 VAC or 80 A @ 230 VAC, at 25^oC
cold start
4000 VAC from input to output
1500 VAC from input to ground
500 VAC from output to ground
270,000 hours at full load at 25^oC ambient
temperature, calculated per MIL-HDBK-217F
Class B conducted, class A radiated
Class B conducted, class A radiated
Class B conducted, class A radiated
Harmonic distortion, class A
Line flicker
ESD, ±8 KV air and ±6 KV contact
Radiated immunity, 3 V/m
Fast transient/burst, ±2 KV
Surge, ±1 KV diff., ±2 KV com.
Conducted immunity, 3 Vrms
Magnetic field immunity, 3 A/m
Voltage dips,
30% reduction for 500 ms
60% reduction for 100 ms
>95% reduction for 5 sec.
Performance criteria A, B, A.
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA
Phone: [phone] ● Fax: [phone] ● email: [e-mail] ● Website: www.TRUMPower.com