P600A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – HIGH CURRENT PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 6.0 Amperes)

P600A THRU P600M
HIGH CURRENT PLASTIC SILICON RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 6.0 Amperes
FEATURES
l High surge current capability
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O Utilizing
Flame Retardant Epoxy Molding Compound
l Void-free plastic in a P600 package
l High current operation 6.0 Amperes @ T_A=55
l Exceeds environmental standards of MIL-S-19500/228
P600
MECHANICAL DATA
Case: Molded plastic, P600
Terminals: axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.07 ounce, 2.1 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
*@ T_A=25 unless otherwise specified. Single phase, half-wave,60 Hz, resistive or inductive load.
**All values except Maximum RMS Voltage are registered JEDEC parameters.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current T_A=55
Maximum Overload Surge Current at 1 cycle (NOTE
1)
Maximum Forward Voltage at 6.0 ADC
Maximum DC Reverse Current @T_A=25
Rated DC Blocking Voltage @T_A=100
Typical Junction capacitance (Note 3) CJ
Typical Thermal Resistance (Note 2) R JA
Typical Thermal Resistance (Note 2) R JL
Operating Temperature Range
Storage Temperature Range
P600A P600B P600D P600G P600J P600K P600M UNITS
50 100 200 400 600 800 1000 V
35 70 140 280 420 560 700 V
50 100 200 400 600 800 1000 V
A
6.0
A
400
A
1.0
10
1.0
150
20.0
4.0
-55 to +150
-55 to +150
V
A
m^ADC
P^F
/W
/W
NOTES:
1. Peak forward surge current, per 8.3ms single half-sine-wave superimposed on rated load(JECED method)
2. Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B.
mounted with 1.1×1.1”(30×30mm) copper pads
3. Measured at 1 MHZ and applied reverse voltage of 4.0 volts