1N5391 Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes)

1N5391 THRU 1N5399
PLASTIC SILICON RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes
FEATURES
l Low cost
l High current capability
l High reliability
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound
l 1.5 ampere operation at T_L=70 with no thermal runaway
l Exceeds environmental standards of MIL-S-19500/228
l Low leakage
DO-15
MECHANICAL DATA
Case: Molded plastic , DO-15
Terminals: Plated axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
1N5391 1N5392 1N5393 1N5394 1N5395 1N5396 1N5397 1N5398 1N5399 _UNITS
Maximum Recurrent Peak Reverse Voltage ^{50 100 200 300 400 500 600 800 1000} V
Maximum RMS Voltage
35
70 140 210 280 350 420 560 700
V
Maximum DC Blocking Voltage
50
100 200 300 400 500 600 800 1000
V
Maximum Average Forward Rectified
1.5
A
Current .375"(9.5mm) Lead Length at
T_A=60
Peak Forward Surge Current 8.3ms single
50
A
half sine-wave superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 1.5A
1.4
V
Maximum Reverse Current Rated T_A=25
DC Blocking Voltage T_A=100
Typical Junction capacitance (Note 1)
Typical Thermal Resistance (Note 2)
5.0
A
500
A
25
P^F
26.0
/W
Operating and Storage Temperature Range
-55 TO +150
T_J,T_STG