1N4001S Datasheet, PDF (1/3 Pages) Pan Jit International Inc. – PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

1N4001S THRU 1N4007S
PLASTIC SILICON RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
FEATURES
l Low forward voltage drop
l High current capability
l High reliability
l High surge current capability
l 0.6mm leads
l Exceeds environmental standards of MIL-S-19500/228
A-405
MECHANICAL DATA
Case: Molded plastic , A-405
Epoxy: UL 94V-O rate flame retardant
Lead: Axial leads, solderable per MIL-STD-202,
method 208 guaranteed
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.008 ounce, 0.22 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
1N4001S 1N4002S 1N4003S 1N4004S 1N4005S 1N4006S 1N4007S _UNITS
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
35
75 140 280 420 560 700 V
Maximum DC Blocking Voltage
50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
1.0
A
Current @T_A=75
Peak Forward Surge Current 8.3ms single
30
A
half sine-wave I_FSM superimposed on rated
load
Maximum Forward Voltage at 1.0A DC
1.1
V
Maximum DC Reverse Current @T_A=25
5.0
A
At Rated DC Blocking Voltage @T_A=100
500
A
Typical Junction capacitance (Note 1)
15
P^F
Typical Thermal Resistance (Note 2) R JA
50
/W
Typical Thermal resistance (NOTE 2) R JL
25
/W
Operating Temperature Range T_J
Storage Temperature Range T_A
-55 to +150
-55 to +150