TQP7M9103_15 Datasheet, PDF (9/16 Pages) TriQuint Semiconductor – 1W High Linearity Amplifier

TQP7M9103
1W High Linearity Amplifier
TQP7M9103-PCB2140 Evaluation Board
C5
J4
R1
C1
J3
C5
C4
C3
U1
R2
C2
J3 Vcc
J4 GND
1.0 uF
C4
0.1 uF
C3
J1
RF
Input
C1
1.5 pF
22 pF
L1
33 nH
0805
1 ^U1
3
TQP7M9103
2,4
C6
1.5 pF
R2
0Ω
C7
1.2 pF
C2
J2
RF
C8 ^{22 pF Output}
0.6 pF
Notes:
1. See PC Board Layout, page 11 for more information.
2. Components shown on the silkscreen but not on the schematic are not used.
3. Component (R1) is a 0 Ω resistors may be replaced with copper trace in the target application layout.
4. The recommended component values are dependent upon the frequency of operation.
5. All components are of 0603 size unless stated on the schematic.
6. Critical component placement locations:
Distance from U1 Pin 1 Pad (left edge) to C6 (right edge): 28 Mils (3.0° at 2140 MHz)
Distance from C6 (left edge) to C1 (right edge): 65 Mils (7.0° at 2140 MHz)
Distance from U1 Pin 3 Pad (right edge) to C7 (left edge): 31 Mils (3.4° at 2140 MHz)
Distance from C7 (right edge) to R2 (left edge): 60 Mils (6.5° at 2140 MHz)
Distance from R2 (right edge) to C8 (left edge): 62 Mils (6.7° at 2140 MHz)
Bill of Material − TQP7M9103-PCB2140
Reference Des.
n/a
U1
C1, C6
C2, C3
C4
C5
C7
C8
R1, R2
L1
Value
n/a
n/a
1.5 pF
22 pF
0.1 uF
1.0 uF
1.2 pF
0.6 pF
0Ω
33 nH
Description
Printed Circuit Board
TQP7M9103 Amplifier, SOT-89 pkg.
Cap., Chip, 0603, +/-0.05pF, 50V, Accu-P
Cap., Chip, 0603, 5%, 50V, NPO/COG
Cap., Chip, 0603, 10%, 16V, X7R
Cap., Chip, 0603, 10%, 10V, X5R
Cap., Chip, 0603, +/-0.05pF, 50V, Accu-P
Cap., Chip, 0603, +/-0.05pF, 50V, Accu-P
Resistor, Chip, 0603, 5%, 1/16W
Inductor, 0805, 5%, Coilcraft CS Series
Manuf.
TriQuint
TriQuint
AVX
various
various
various
AVX
AVX
various
Coilcraft
Part Number
1080068
TQP7M9103
06032U1R5BAT2A
06035J1R2ABSTR
06035J0R6ABSTR
0805CS-330XJLB
Datasheet: Rev H 12-10-14
© 2014 TriQuint
- 9 of 16 -
Disclaimer: Subject to change without notice
www.triquint.com