TQM879008_15 Datasheet, PDF (9/10 Pages) TriQuint Semiconductor – 1.5-2.7 GHz W Digital Variable Gain Amplifier

TQM879008
1.5-2.7 GHz ½ W Digital Variable Gain Amplifier
Package Marking and Dimensions
Marking: Part number – TQM879008
Year/week code – YYWW CCCC
Assembly code– AaXXXX
2X
.10 C
4
TERMINAL #1
IDENTIFIER
6.0±0.1
28X 0.10
28X 0.70 Pitch
0.70
TERMINAL #1
IDENTIFIER
4
(28X) 0.450x X 0.400y
0.10 C A B
TQM879008
2.10
YYWW CCCC 6.0±0.1
5.35
0.70
AaXXXX
2.10
(1X) shape
2X
0.10 C A B
.10 C
.10 C
28X
.08 C
5
1.02±0.08
SEATING PLANE
C
2.10
2.10
GND/THERMAL PAD
5
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Except where noted, this part outline conforms to JEDEC standard MO-270, Issue B (Variation DAE) for extra thin profile, fine
pitch, internal stacking module (ISM).
3. Dimension and tolerance formats conform to ASME Y14.4M-1994.
4. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.
5. Co-planarity applies to the exposed ground/thermal pad as well as the contact pins.
6. Package body length/width does not include plastic flash protrusion across mold parting line.
PCB Mounting Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Use 1 oz. copper minimum for top and bottom layer metal.
3. Vias are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We
recommend a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.10”).
4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.
Datasheet: Rev I 01-06-14
© 2013 TriQuint
- 9 of 10 -
Disclaimer: Subject to change without notice
www.triquint.com