CMY210_15 Datasheet, PDF (3/9 Pages) TriQuint Semiconductor – Ultra-Linear Mixer with Integrated LO Buffer

CMY 210 Datasheet
________________________________________________________________________________________________________
Electrical Characteristics
Test conditions: T_a = 25°C; V_DD= 3V, see test circuit; f_RF = 808MHz;
f_LO = 965MHz; P_LO = 0dBm; f_IF = 157MHz, unless otherwise specified:
Parameter, Test Conditions
Symbol min typ max Unit
Operating Current
I_op
Conversion Loss
L_c
SSB Noise Figure
F_ssb
2 Tone 3rd Order IMD
d_IM3
P_RF1 = P_RF2 = -3dBm
f_RF1 = 806MHz; f_RF2 = 810MHz; f_LO =965MHz
3rd Order Input Intercept Point
IP3_in
P_-1dB Input Power
P_-1dB
LO Leakage at RF/IF-Port (1,6)
P_{LO 1,6}
-
6.0 8.0 mA
-
5.7 7.0 dB
-
6.0
-
dB
-
54
- dBc
20 24
-
14
-
-8
- dBm
- dBm
- dBm
Applications Information
Test circuit / application example
L2
in/ out
L1 C1
RF
50 Ohm
C2
CMY210
1
6
LOin
3
C3 L3
4
2,5
C4
L4
Vdd
Notes for external elements:
out/ in
IF
50 Ohm
L1, C1: Filter for upper frequency;
C2, L2: Filter for lower frequency;
each filter is a throughpath for the
desired frequency (RF or IF) and
isolates the other frequency (IF or
RF) and its harmonics.
These two filters must be
connected to pin 1 and pin 6
directly.
Parasitic capacitances at the ports
1 and 6 must be as small as
possible.
L4 and C4 are optimized by
indicating lowest Iop at used LO-
frequency; same procedure for L3.
The ports 1, 3 and 6 must be DC
open.
Lumped element values for 800MHz test and application circuit:
f LO F RF F IF
L1
C1
L2
C2
L3
C3
MHz MHz MHz nH
pF
nH
pF
nH
pF
965
808
157 8.2
3.9
8.2
3.3
6.8
47
L4
C4
nH
pF
15
33
For additional information and latest specifications, see our website: www.triquint.com
4
Revision E, September 12, 2006