TQP9113 Datasheet, PDF (2/13 Pages) TriQuint Semiconductor – 1 Watt Linear Amplifier

Absolute Maximum Ratings
Parameter
Rating
Storage Temperature
−55 to 150 °C
Supply Voltage (VCC)
+6 V
RF Input Power, CW, 50 Ω, T=25 °C +15 dBm
Operation of this device outside the parameter ranges
given above may cause permanent damage.
TQP9113
1 Watt Linear Amplifier
Recommended Operating Conditions
Parameter
Min Typ Max Units
Supply Voltage (VCC)
+4.75 +5.0 +5.25 V
TCASE
−40
Tj for >10⁶ hours MTTF
+105 °C
+170 °C
Electrical specifications are measured at specified test
conditions. Specifications are not guaranteed over all
recommended operating conditions.
Electrical Specifications
Test conditions unless otherwise noted: VCC = +5.0 V, Temp = +25 °C, in a matched 2140 MHz reference circuit.
Parameter
Conditions
Min
Typ
Max
Operational Frequency Range
1800
2700
Test Frequency
2140
Gain
27.6
Input Return Loss
14
Output Return Loss
14
Noise Figure
4.7
Output P1dB
+30.6
Output IP3
Pout = +16 dBm / tone, Δf = 1 MHz
+41
WCDMA Channel Power⁽¹⁾
−50 dBc ACLR
+18.4
Current, ICC
212
Current, IREF1
1.2
Current, IREF2
2.2
Total Current
215
Thermal Resistance, θjc
Junction to case
41.7
Notes:
1. ACLR test set-up: 3GPP WCDMA, TM1+64 DPCH, +5 MHz offset, PAR = 10.2 dB at 0.01% Probability
Units
MHz
MHz
dB
dB
dB
dB
dBm
dBm
dBm
mA
mA
mA
mA
°C/W
Advanced Data Sheet: Rev. F 10-23-15
© 2015 TriQuint Semiconductor, Inc
- 2 of 13 -
Disclaimer: Subject to change without notice
www.triquint.com / www.qorvo.com