TQP9107_15 Datasheet, PDF (1/9 Pages) TriQuint Semiconductor – 699-960 MHz 2-stage Power Amplifier

Applications
• Wireless Infrastructure
• Repeaters, Boosters, DAS
• High Power Amplifiers
• Small cell BTS
TQP9107
699-960 MHz 2-stage Power Amplifier
3.5 x 4.5 mm Leadless SMT Package
Product Features
• 699 – 960 MHz Frequency Range
• 35.5 dB gain
• +46 dBm Output IP3 at Pout = +24 dBm/tone
• 31% PAE at +27 dBm Pout
• Internally Matched
• Integrated Inter-Stage Matching
• Bias Adjustable
• Low idle current
Functional Block Diagram
RFin V_PD1 V_PD2 N/C N/C
13 12 11 10 9
N/C
RFout
8
7
AMP1
Matching
Network
AMP2
Matching
Network
Pin 1
Reference Mark
Package Topside
12
3
4
5
6
V_BIAS V_CC
N/C
N/C
N/C
N/C
Top View
Exposed
Backside Pad
GND
General Description
The TQP9107 is a high-efficiency two-stage power
amplifier in a low-cost surface-mount package. The
amplifier is able to achieve 31% power added efficiency
at +27 dBm output power while operating with a low 84
mA idle current. The amplifier is designed to ensure that
all odd-order IMD products are below −17 dBm at all
output power levels below +24 dBm/tone.
The TQP9107 integrates two high performance amplifier
stages onto a module to allow for a compact system
design and requires very few external components for
operation. The amplifier is bias adjustable allowing the
amplifier’s power consumption to be optimized. The
TQP9107 is available in a lead-free/RoHS-compliant 13-
pin 3.5 x 4.5mm surface mount package and is pin-
compatible to the higher frequency band version in the
family with the TQP9108 (1.7-2.17 GHz).
Pin Configuration
Pin No.
1
2
3, 4, 5, 6, 8, 9, 10
7
11
12
13
Backside Pad
Label
VBIAS
VCC
GND or N/C
RFout
VPD1
VPD2
RFin
GND
Ordering Information
Part No.
TQP9107
TQP9107-PCB
Description
699-960 MHz Power Amplifier
Evaluation board
Advanced Data Sheet: Rev E 10-29-14
© 2014 TriQuint
- 1 of 9 -
Disclaimer: Subject to change without notice
www.triquint.com