TQP9058H_15 Datasheet, PDF (1/1 Pages) TriQuint Semiconductor – Multi-Mode / Multi-Band Power Amplifier Module

Applications
 GSM / EDGE / WCDMA / LTE
 PB WCDMA + QB EDGE
 HSDPA / HSUPA / HSPA+
 LTE / EVDO Rev. A & B
TQP9058H
Multi-Mode / Multi-Band Power Amplifier Module
42-pin 5 x 7 mm Package
Product Features
 Quad-Band Linear GSM / EDGE
 UMTS B1, 2/25, 3/4 and B5/26, 8
 VRAMP Controlled Output Power – GMSK
 VRAMP Optimized Bias in 8-PSK for Linearity and
Current Consumption
 Two W/CDMA Modes – HPM & LPM
 HBT / CuFlip® PA Technology
 Integrated Coupler And Band Distribution Switches
 Built-in Voltage Regulator
 50Ω Input and Output Impedance
 Lead-free 260°C / RoHS / Halogen-free
 42 Pin 5x7x1.0 mm Package
Functional Block Diagram
General Description
The TQP9058H is a fully matched multimode multiband
Power Amplifier Module that supports Quad-band
GSM/EDGE, W/CDMA & LTE Bands 1, 2/25, 3/4, 5/26 &
8. The GSM PA output power is controlled by the VRAMP
coming from the transceiver in GMSK modes. In 8-PSK
modes, VRAMP is used to optimize current consumption
and linearity. The 2-Gain state WCDMA PA operates in
LPM and HPM to maximize talk time over the entire
range of operating conditions. It also includes a coupler
and built-in regulator, ideal for today’s extremely small
data enabled phones.
The TQP9058H is designed on TriQuint’s GaAs HBT
technology with CuFlip® assembly offering state of the
art reliability, temperature stability and ruggedness. RF
performance meets the stringent linearity requirements
for multi-mode operation.
Ordering Information
Part No. Description
TQP9058H Multimode Multiband Power Amplifier Module
Standard T/R size = 2500 pieces on a 7” reel
Datasheet: Rev. E 12-05-14
© 2014 TriQuint
- 1 of 20 -
Disclaimer: Subject to change without notice
www.triquint.com