TQP887051_15 Datasheet, PDF (1/1 Pages) TriQuint Semiconductor – 802.11a/n/ac WLAN Front End Module

TQP887051
802.11a/n/ac WLAN Front End Module
Applications
• IEEE802.11a/n/ac WLAN Applications
• Single-Chip RF Front-end Module
• Wireless LAN Systems
• Portable Battery-Powered Equipment
Product Features
• Fully Integrated, 802.11a/n/ac front-end module
• Internally matched input/output
• Integrated directional detector
• Temperature Compensated Bias Network
• Single battery voltage of 3.2V- 4.6V
• Leadless 2.5 x 2.5 x 0.40 mm SMT Pb-Free
• Typ. Pout (+25C, V_DD=+3.6V) = 16dBm,
EVM=1.78%, 802.11ac/MCS9/VHT80
• Typ. Pout (+25C, V_DD=+3.8V) = 19.7dBm,
EVM=3.0%, 802.11n/MCS7
• Typ. Pout (+25C, V_DD=+3.8V) = 20.3dBm,
EVM=4.6%, 64QAM, 54Mbps OFDM
Functional Block Diagram
General Description
The TQP887051 is full WLAN front-end module in an
ultra small 2.5mm x 2.5mm footprint package for
802.11a/n/ac applications. The TQP887051 contains 5GHz
PA, directional detector, front-end SPDT switch, and LNA
with bypass mode. The architecture and interface are
optimized for next generation WLAN integration into
handset devices.
The front-end module features CMOS compatible control
voltages to facilitate ease of use. With its low power
dissipation, the front-end Module contributes to the
extended battery life of next generation WLAN solutions.
The front-end module is manufactured in TriQuint’s high-
reliability E/D pHEMT technology and is assembled in
ultra thin profile 2.5mm x 2.5mm x 0.40mm QFN - 16 Pb-
Free Package.
Pin Configuration
Pin #
1, 3, 7, 12, 14, 17
2
4
5
6
8
9
10
11
13
15
16
Symbol
GND
Rx output
Vdd1 LNA, PA 1^st stg, logic control
Vdet
PA_EN & TX switch pin
Tx
Spare, No connect
Vdd2 supply pin 5G PA 2^nd stg
Vdd3 supply pin 5G PA 3^rd stg
ANT
Vc1, control pin 5G RX
LNA_EN
Ordering Information
Part No.
TQP887051
Description
Packaged part
Standard T/R size = 2.5K pieces on a 7” reel.
Data Sheet: Rev F 07-18-13
© 2013 TriQuint
- 1 of 17 -
Disclaimer: Subject to change without notice
www.triquint.com