TQP879001A_15 Datasheet, PDF (1/1 Pages) TriQuint Semiconductor – 2.4GHz WLAN LNA+ SP3T Switch

TQP879001A
2.4GHz WLAN LNA+ SP3T Switch
Applications
 802.11b/g/n WLAN applications
 WLAN systems
 Portable battery powered equipment
Product Features
 2.4GHz WLAN by-passable LNA cascaded with
low loss SP3T switch
 Temperature compensated bias network
 Single battery voltage of 3.0V to 3.6V
Package Description
 1.5mm x 1.5mm x 0.55mm ETSLP-12 Lead-free,
Halogen-free, MSL-1 package
General Description
Pin Configuration
The TQP879001A is a fully-integrated LNA + SP3T
switch in an ultra-small 1.5mm x 1.5mm x 0.55mm
footprint package for 802.11b/g/n + BT applications.
The TQP879001A contains by-passable LNA, SP3T
switch, and associated bias networks. The
architecture and interface are optimized for next
generation WLAN devices. The FEM features CMOS
compatible control voltages to facilitate ease of use.
With its low noise figure and low power dissipation,
the FEM contributes to the extended battery life of
next generation WLAN solutions. The TQP879001A is
manufactured in TriQuint’s high-reliability E/D pHEMT
technology and is assembled in a 1.5mm x 1.5mm x
0.55mm leadless package.
Pin Number/Name Pin Number/Name
1 VC1
2 ANT
3 VC3
4 TX
5 SW_OUT
7 GND
8 RX
9 GND
10 VDD
11 VC2
6 GND
12 BT
Center Paddle GND
Ordering Information
Part No.
TQP879001A
Description
2.4GHz WLAN LNA + SP3T
Switch
Standard T/R size = 5000 pieces per reel.
Data Sheet: Rev E 12/05/2012
© 2012 TriQuint Semiconductor, Inc.
-1-
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network^®r