TQP7M9106_15 Datasheet, PDF (1/8 Pages) TriQuint Semiconductor – 2 Watt High Linearity Amplifier

TQP7M9106
2 Watt High Linearity Amplifier
Applications
 Repeaters
 BTS Transceivers
 BTS High Power Amplifiers
 CDMA / WCDMA / LTE
 General Purpose Wireless
24 Pin 4x4 mm QFN Package
Product Features
 50−1500 MHz
 +33 dBm P1dB at 940 MHz
 +50 dBm Output IP3 at 940 MHz
 20.8 dB Gain at 940 MHz
 +5V Single Supply, 455 mA Current
 Patented internal RF overdrive protection
 Patented internal DC overvoltage protection
 On chip ESD protection
 Shut-down capability
 Capable of handling 10:1 VSWR at Vcc=+5 V, 0.9
GHz, 33 dBm CW Pout or 23.5 dBm WCDMA Pout
Functional Block Diagram
1
Vbias
2
GND/NC
3
GND/NC
4
RFin
5
RFin
6
GND/NC
18
Iref
17
GND/NC
16
RFout/Vcc
15
RFout/Vcc
14
RFout/Vcc
13
GND/NC
General Description
The TQP7M9106 is a high linearity, high gain 2W
driver amplifier in industry standard, RoHS compliant,
QFN surface mount package. This InGaP/GaAs HBT
delivers high performance across 0.05 to 1.5 GHz
range of frequencies while achieving 20.8 dB gain, +50
dBm OIP3 and +33 dBm P1dB at 940MHz while only
consuming 455 mA quiescent current. All devices are
100% RF and DC tested.
The TQP7M9106 incorporates patented on-chip circuit
techniques that differentiate it from other products in
the market. The amplifier integrates an on-chip DC
over-voltage and RF over-drive protection. This
protects the amplifier from electrical DC voltage surges
and high input RF input power levels that may occur in
a system.
The TQP7M9106 is targeted for use as a driver
amplifier in wireless infrastructure where high linearity,
medium power, and high efficiency are required. The
device is an excellent candidate for transceiver line
cards and high power amplifiers in current and next
generation multi-carrier 3G / 4G base stations.
Pin Configuration
Pin No.
1
4, 5
14, 15, 16
18
2, 3, 6-13, 17, 19-24
Symbol
Vbias
RFin
RFout/Vcc
Iref
GND/NC
Ordering Information
Part No.
Description
TQP7M9106
2 W High Linearity Amplifier
TQP7M9106-PCB900 920−960 MHz Evaluation Board
Standard T/R size = 2500 pieces on a 13” reel.
Datasheet: Rev D 01-24-13
© 2013 TriQuint
- 1 of 8 -
Disclaimer: Subject to change without notice