TQP7M9101_15 Datasheet, PDF (1/20 Pages) TriQuint Semiconductor – W High Linearity Amplifier

TQP7M9101
¼ W High Linearity Amplifier
Applications
 Repeaters
 Mobile Infrastructure
 CDMA / WCDMA / LTE
 General Purpose Wireless
3 Pin SOT-89 Package
Product Features
 400 – 4000 MHz
 +25 dBm P1dB
 +39.5 dBm Output IP3
 17.5 dB Gain at 2140 MHz
 +5 V Single Supply, 87 mA Current
 No Output Matching Required
 Internal RF Overdrive Protection
 Internal DC Overvoltage Protection
 On-Chip ESD Protection
 SOT-89 Package
Functional Block Diagram
Backside Paddle - GND
1
RF IN
2
3
GND RF OUT / V_CC
General Description
The TQP7M9101 is a high-linearity driver amplifier in a
standard SOT-89 surface mount package. This
InGaP/GaAs HBT delivers high performance across a
broad range of frequencies with +40 dBm OIP3 and with
+25 dBm P1dB while only consuming 87 mA quiescent
current. All devices are 100% RF and DC tested.
Pin Configuration
Pin No.
1
3
2
Backside Paddle
Label
RF IN
RF OUT / VCC
GND
GND
The TQP7M9101 incorporates on-chip features that
differentiate it from other products in the market. The RF
output is internally matched in to 50 ohms. Only input
matching is required for optimal performance in specific
frequency bands making the component easy for design
engineers to implement in their systems. The amplifier
integrates an on-chip DC over-voltage and RF over-drive
protection. This protects the amplifier from electrical DC
voltage surges and high input RF input power levels that
may occur in a system. On-chip ESD protection allows
the amplifier to have a very robust Class 2 HBM ESD
rating.
The TQP7M9101 is targeted for use as a driver amplifier
in wireless infrastructure where high linearity, medium
power, and high efficiency are required. The device an
excellent candidate for transceiver line cards in current
and next generation multi-carrier 3G / 4G base stations.
Ordering Information
Part No.
TQP7M9101
Description
¼ W High Linearity Amplifier
TQP7M9101-PCB900 869 – 960 MHz Evaluation Board
TQP7M9101-PCB2140 2.11 – 2.17 GHz Evaluation Board
TQP7M9101-PCB2600 2.5–2.7 GHz Evaluation Board
Standard T/R size = 1000 pieces on a 7” reel
Datasheet: Rev. J 12/11/2014
© 2014 TriQuint
- 1 of 20 -
Disclaimer: Subject to change without notice
www.triquint.com