TQP4M9083 Datasheet, PDF (1/11 Pages) TriQuint Semiconductor – High Linearity 7-Bit, 31.75dB Digital Step Attenuator

TQP4M9083
High Linearity 7-Bit, 31.75dB Digital Step Attenuator
Applications
 Mobile Infrastructure
 LTE / WCDMA / CDMA / EDGE
 Test Equipment and Sensors
 IF and RF Applications
 General Purpose Wireless
Product Features
 0.4 – 3.5 GHz
 0.25 dB LSB Steps to 31.75 dB
 +55 dBm Input IP3
 1.7 dB Insertion Loss @ 2.5 GHz
 CMOS compatible Serial Control Interface
 Max attenuation state at initial power up
 50 Ω Impedance
 +5V Supply Voltage
24-pin 4x4mm leadless QFN package
Functional Block Diagram
1
NC
2
CLK
3
SERIN
4
LE
5
GND
6
RF IN
SERIAL
CONTROL
7-BIT
31.75
DSA
18
Vdd
17
NC
16
NC
15
SEROUT
14
GND
13
RF OUT
General Description
The TQP4M9083 is a high linearity, low insertion loss, 7-bit,
31.75 dB Digital Step Attenuator (DSA) operating over the
0.4–3.5GHz frequency range. The digital step attenuator uses
a single positive 5V supply and has a serial periphery
interface (SPI^TM) for changing attenuation states. This
product maintains high attenuation accuracy over frequency
and temperature. No external matching components are
needed for the DSA.
The TQP4M9083 is available in a standard lead-free
/green/RoHS-compliant 24-pin 4x4mm QFN package. The
TQP4M9071 and TQP4M9072 are also available from
TriQuint as a footprint and pin compatible 6-bit, 31.5dB DSA
with a parallel control interface and serial control interface
respectively.
Pin Configuration
Pin #
2
3
4
6
13
15
18
5, 14
Backside Paddle
All other pins are N/C
Symbol
CLK
SERIN
LE
RF IN
RF OUT
SEROUT
Vdd
GND
Ground
Ordering Information
Part No.
Description
TQP4M9083
TQP4M9083-PCB
7-Bit, 31.75 dB DSA
0.4-3.5GHz Evaluation Board
PCB includes USB control interface board, EVH.
Standard T/R size = 2500 pieces on a 13” reel.
Data Sheet: Rev D 05-11-12
© 2012 TriQuint Semiconductor, Inc.
- 1 of 11 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network^®