TQP4M0011_15 Datasheet, PDF (1/6 Pages) TriQuint Semiconductor – Low Loss SP3T Reflective Switch

TQP4M0011
Low Loss SP3T Reflective Switch
Applications
• WLAN
• Cellular Infrastructure
• Test and Measurement
• Smart Energy
• UHF/VHF
• LMR
• General Purpose Broadband Wireless
12-pin 3x3 mm QFN Package
Product Features
• General Purpose
• Broadband: 100-6000 MHz
• Low Insertion Loss: 0.6 dB at 2 GHz
• High Input IP3: +55 dBm at 2 GHz
• CMOS Compatible Triple Voltage Control
• Lead Free, RoHS Compliant QFN Package
Functional Block Diagram
Topside View
Pin 1 Reference Mark
N/C RFC N/C
12 11 10
V3 1
9 V1
RF3 2
8 RF1
GND 3
7 GND
456
GND RF2 V2
Backside Paddle - RF/DC GND
General Description
The TQP4M0011 is GaAs FET single-pole, three throw
(SP3T) switch with control signals from three
independent control bias lines. Signal path (switch)
states may be controlled using DC voltages operating
from 1.8 to 5 Volts. The TQP4M0011 has 100 to 6000
MHz broadband performance
The TQP4M0011 is packaged in a RoHS-compliant,
compact 12-pin 3x3 mm QFN package.
The TQP4M0011 is an ideal choice for wireless
infrastructure and test & measurement applications
requiring low insertion loss and high input IP3. It can
also be used for any general purpose RF application
where isolation is critical.
Pin Configuration
Pin No.
1
2
3, 4, 7
5
6
8
9
10, 12
11
Backside Paddle
Symbol
V3
RF3
GND
RF2
V2
RF1
V1
N/C
RFC
RF/DC GND
Ordering Information
Part No.
Description
TQP4M0011
SP3T Reflective Switch
TQP4M0011-PCB 0.1- 6.0 GHz Evaluation Board
Standard T/R size = 2500 pieces on a 7” reel
Datasheet: Rev. C 05-01-14
© 2014 TriQuint
- 1 of 6 -
Disclaimer: Subject to change without notice
www.triquint.com