|
TQP3M9036_15 Datasheet, PDF (1/12 Pages) TriQuint Semiconductor – High-Linearity LNA Gain Block | |||
|
TQP3M9036
High-Linearity LNA Gain Block
Applications
ï· Repeaters
ï· Mobile Infrastructure
ï· LTE / WCDMA / CDMA / GSM
ï· General Purpose Wireless
ï· TDD or FDD systems
Product Features
ï· 100â2000 MHz Operational Bandwidth
ï· Ultra low noise figure, 0.45 dB NF at 900 MHz
ï· High gain, 19.8 dB Gain at 900 MHz
ï· High linearity, +36 dBm Output IP3
ï· High input power ruggedness, >22 dBm PIN, MAX
ï· Unconditionally stable
ï· Integrated on-chip matching, 50 ohm in/out
ï· Integrated active bias
ï· Integrated shutdown control pin
ï· 3-5 V positive supply voltage: âVgg not required
ï· Pin compatible with high-band TQP3M9037
General Description
The TQP3M9036 is a high linearity, ultra low noise gain
block amplifier in a small 2x2 mm surface-mount
package. At 900 MHz, the amplifier typically provides
high 19.8 dB gain, +36 dBm OIP3, and 0.45 dB Noise
Figure while drawing 68 mA current from a 5V supply.
The amplifier does not require any negative supplies for
operation and can be biased from positive supply rails
from 3.3 to 5 V. The device is housed in a lead-
free/green/RoHS-compliant industry-standard 2x2 mm
package.
The TQP3M9036 is internally matched using a high
performance E-pHEMT process and only requires 4
external components for operation from a single positive
supply: an external RF choke and blocking/bypass
capacitors. The low noise amplifier contains an internal
active bias to maintain high performance over
temperature and integrates a shut-down biasing
capability for TDD applications.
The TQP3M9036 covers the 100â2000 MHz frequency
band and is targeted for wireless infrastructure. The
LNA is pin compatible with the high-band, 1500â2700
MHz TQP3M9037.
8-Pin 2x2 mm DFN Package
Functional Block Diagram
Pin Configuration
Pin No.
1, 3, 4, 5, 8
2
6
7
Backside Paddle
Label
No Connect or GND
RF In
Shut Down
RF Out
RF/DC GND
Ordering Information
Part No.
Description
TQP3M9036
Ultra low noise, High IP3 LNA
TQP3M9036âPCB 100â2000 MHz Evaluation Board
Standard T/R size = 2500 pieces on a 7â reel
Datasheet: Rev. F 11-14-14
© 2014 TriQuint
- 1 of 12 -
Disclaimer: Subject to change without notice
www.triquint.com
|
▷ |