TQP3M9006 Datasheet, PDF (1/9 Pages) TriQuint Semiconductor – High Linearity LNA Gain Block

TQP3M9006
High Linearity LNA Gain Block
Applications
 Repeaters
 Mobile Infrastructure
 LTE / WCDMA / CDMA / EDGE
 General Purpose Wireless
Product Features
 500-4000 MHz
 13.5 dB Gain @ 1.9 GHz
 1.0 dB Noise Figure @ 1.9 GHz
 +38.5 dBm Output IP3
 +22.4 dBm P1dB
 50 Ohm Cascadable Gain Block
 Unconditionally Stable
 High Input Power Capability
 +5V Single Supply, 90 mA Current
 3x3 mm QFN Package
General Description
The TQP3M9006 is a high linearity low noise gain block
amplifier in a low-cost surface-mount package. At 1.9
GHz, the amplifier typically provides 13.5 dB gain, +38.5
dBm OIP3, and 1.2 dB Noise Figure while only drawing
90 mA current. The device is housed in a
leadfree/green/RoHS-compliant industry-standard 16-pin
3x3mm QFN package.
The TQP3M9006 has the benefit of having high linearity
while also providing very low noise across a broad range
of frequencies. This allows the device to be used in both
receive and transmit chains for high performance
systems. The amplifier is internally matched using a high
performance E-pHEMT process and only requires an
external RF choke and blocking/bypass capacitors for
operation from a single +5V supply. The internal active
bias circuit also enables stable operation over bias and
temperature variations.
The TQP3M9006 covers the 0.5- 4 GHz frequency band
and is targeted for wireless infrastructure or other
applications requiring high linearity and/or low noise
figure.
16-pin 3x3 QFN package
Functional Block Diagram
Pin Configuration
Pin #
2
11
All Other Pins
Backside Paddle
Symbol
RF Input
RF Output / Vdd
N/C or GND
GND
Ordering Information
Part No.
TQP3M9006
Description
High Linearity LNA Gain Block
TQP3M9006-PCB
0.5-4 GHz Evaluation Board
Standard T/R size = 2500 pieces on a 7” reel.
Data Sheet: Rev C 05/26/11
© 2011 TriQuint Semiconductor, Inc.
- 1 of 9 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network^®