TQP369182 Datasheet, PDF (1/8 Pages) TriQuint Semiconductor – DC-6 GHz Gain Block

TQP369182
DC-6 GHz Gain Block
Applications
 Wireless Infrastructure
 CATV / SATV / MoCA
 Point to Point
 Defense & Aerospace
 Test & Measurement Equipment
 General Purpose Wireless
Product Features
 DC-6000 MHz
 Flat, broadband frequency response
 20.7 dB Gain at 1.9 GHz
 3.9 dB Noise Figure at 1.9 GHz
 +28 dBm Output IP3 at 1.9 GHz
 +15.1 dBm P1dB at 1.9 GHz
 50 Ohm Cascadable Gain Block
 Single Supply, 45 mA Current
 SOT-89 Package
SOT-89 Package
Functional Block Diagram
GND
4
1
RF IN
2
GND
3
RF OUT
General Description
Pin Configuration
The TQP369182 is a general-purpose buffer amplifier
that offers high dynamic range in a low-cost surface-
mount package. At 1.9 GHz, the amplifier typically
provides 20.7 dB gain, +28 dBm OIP3, and 3.9 dB Noise
Figure while drawing 45 mA current. The device
combines dependable performance with consistent quality
to maintain MTTF values exceeding 100 years at
mounting temperatures of +85°C. The device is housed
in a lead-free/green/RoHS-compliant industry-standard
SOT-89 package.
Pin #
1
3
2, 4
Symbol
RF IN
RF OUT
GND
The TQP369182 consists of a Darlington-pair amplifier
using TriQuint’s high reliability InGaP/GaAs HBT
process technology. Only DC-blocking capacitors, a bias
resistor, and an inductive RF choke are required for
operation.
This broadband MMIC amplifier can be directly applied
to various current and next generation wireless
technologies such as CDMA, W-CDMA, and LTE. In
addition, the TQP369182 will work for other applications
within the DC to 6 GHz frequency range.
Ordering Information
Part No.
Description
TQP369182
InGaP/GaAs HBT Gain Block
TQP369182-PCB
0.5-4 GHz Evaluation Board
Standard T/R size = 2500 pieces on a 13” reel
Data Sheet: Rev D 05/15/12
© 2012 TriQuint Semiconductor, Inc.
- 1 of 8 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network^®