TQP369181_15 Datasheet, PDF (1/8 Pages) TriQuint Semiconductor – DC-6 GHz Gain Block

Applications
• Wireless Infrastructure
• CATV / SATV / MoCA
• Point to Point
• Defense & Aerospace
• Test & Measurement Equipment
• General Purpose Wireless
Product Features
• DC – 6000 MHz
• Flat, broadband frequency response
• 15.3 dB Gain at 1900 MHz
• 3.6 dB Noise Figure at 1900 MHz
• +29 dBm Output IP3 at 1900 MHz
• +14.4 dBm P1dB at 1900 MHz
• 50 Ohm Cascadable Gain Block
• Single Supply, 45 mA Current
• SOT-363 Package
TQP369181
DC-6 GHz Gain Block
SOT-363 Package
Functional Block Diagram
General Description
The TQP369181 is a general-purpose buffer amplifier
that offers high dynamic range in a low-cost surface-
mount package. At 1900 MHz, the amplifier typically
provides 15.3 dB gain, +29 dBm OIP3, and 3.6 dB Noise
Figure while drawing 45 mA current. The device
combines dependable performance with consistent
quality to maintain MTTF values exceeding 100 years at
mounting temperatures of +85 °C. The device is housed
in a lead-free/green/RoHS-compliant industry-standard
SOT-363 package.
Pin Configuration
Pin No.
3
6
1, 2, 4, 5
Label
RF IN
RF OUT
GND
The TQP369181 consists of a Darlington-pair amplifier
using the high reliability InGaP/GaAs HBT process
technology. Only DC-blocking capacitors, a bias
resistor, and an inductive RF choke are required for
operation.
This broadband MMIC amplifier can be directly applied
to various current and next generation wireless
technologies such as CDMA, W-CDMA, and LTE. In
addition, the TQP369181 will work for other applications
within the DC to 6 GHz frequency range.
Ordering Information
Part No.
TQP369181
Description
InGaP/GaAs HBT Gain Block
TQP369181-PCB 500 – 6000 MHz Evaluation Board
Standard T/R size = 3000 pieces on a 7” reel
Datasheet: Rev. E 08/17/14
© 2014 TriQuint
- 1 of 8 -
Disclaimer: Subject to change without notice
www.triquint.com