TQP369180_15 Datasheet, PDF (1/8 Pages) TriQuint Semiconductor – DC-6 GHz Gain Block

Applications
• Wireless Infrastructure
• CATV / SATV / MoCA
• Point to Point
• Defense & Aerospace
• Test & Measurement Equipment
• General Purpose Wireless
Product Features
• DC-6000 MHz
• Flat, broadband frequency response
• 15 dB Gain at 1.9 GHz
• 3.6 dB Noise Figure at 1.9 GHz
• +29.5 dBm Output IP3 at 1.9 GHz
• +14.4 dBm P1dB at 1.9 GHz
• 50 Ohm Cascadable Gain Block
• Single Supply, 45 mA Current
• SOT-89 Package
TQP369180
DC-6 GHz Gain Block
SOT-89 Package
Functional Block Diagram
GND
4
1
RF IN
2
GND
3
RF OUT
General Description
The TQP369180 is a general-purpose buffer amplifier
that offers high dynamic range in a low-cost surface-
mount package. At 1.9 GHz, the amplifier typically
provides 15.0 dB gain, +29.5 dBm OIP3, and 3.6 dB
Noise Figure while drawing 45 mA current. The device
combines dependable performance with consistent
quality to maintain MTTF values exceeding 100 years at
mounting temperatures of +85°C. The device is housed
in a lead-free/green/RoHS-compliant industry-standard
SOT-89 package.
Pin Configuration
Pin No.
1
3
2, 4
Backside Paddle
Label
RF IN
RF OUT
GND
GND
The TQP369180 consists of a Darlington-pair amplifier
using the high reliability InGaP/GaAs HBT process
technology. Only DC-blocking capacitors, a bias
resistor, and an inductive RF choke are required for
operation.
This broadband MMIC amplifier can be directly applied
to various current and next generation wireless
technologies such as CDMA, W-CDMA, and LTE. In
addition, the TQP369180 will work for other applications
within the DC to 6 GHz frequency range.
Ordering Information
Part No.
Description
TQP369180
InGaP/GaAs HBT Gain Block
TQP369180-PCB 0.5-4 GHz Evaluation Board
Standard T/R size = 2500 pieces on a 13” reel
Datasheet: Rev G 08/15/14
© 2014 TriQuint
- 1 of 8 -
Disclaimer: Subject to change without notice
www.triquint.com