TQM879026_15 Datasheet, PDF (1/17 Pages) TriQuint Semiconductor – 0.7-4 GHz W Digital Variable Gain Amplifier

Applications
 3G / 4G Wireless Infrastructure
 Repeaters
 LTE / WCDMA / CDMA
Product Features
 700-4000 MHz
 32 dB Maximum Gain at 2140 MHz
 31.5 dB Gain Range in 0.5 dB Steps
 +42.5 dBm Output IP3
 +24 dBm Output P1dB
 1.6 dB Noise Figure
 3-wire SPI Control Programming
TQM879026
0.7-4 GHz ¼W Digital Variable Gain Amplifier
24 Pin 4x4 mm leadless SMT Package
Functional Block Diagram
General Description
Pin Configuration
The TQM879026 is a digital variable gain amplifier
(DVGA) featuring high linearity and digital variable gain
control in 0.5 dB step sizes. This DVGA integrates a
gain block, a digital-step attenuator (DSA), and a high
linearity ¼-watt amplifier into a compact 4x4 mm
package. The internal 6-bit DSA provides a 31.5 dB
gain control range and is controlled with a serial
periphery interface (SPI^TM). The individual stages are
accessible to external ports to allow for optimization of
the last stage amplifier for individual bands and also
allowing other functional blocks to be added in-between
the stages.
The TQM879026 features variable gain from 1 dB to 32
dB at 2.14 GHz, +42.5 dBm output IP3, and +24 dBm
P1dB while only consuming 174 mA current from a 5V
supply. The module is available in a compact 24-pin 4x4
mm leadless SMT package.
Pin No.
1,2,4,6,7,9,11,17,18,19,
21,22,24
3
5
8
10
12
13
14
15
16
20
23
Backside Paddle
Label
NC (No Connect)
DSA In
Amp1 Out / Vcc1
Amp1 In
SOD
V_DD
CLK
SID
LE
Amp2 Out / Vcc2
Amp2 In
DSA Out
RF/DC Ground
Ordering Information
Part No.
Description
TQM879026
¼ W 0.7-4.0 GHz DVGA
TQM879026-PCB900 900 MHz Evaluation Board
TQM879026-PCB2140 2140 MHz Evaluation Board
Standard T/R size = 2500 pieces on a 13” reel
Evaluation Boards include USB control board
Datasheet: Rev D 11-10-14
© 2014 TriQuint
- 1 of 17 -
Disclaimer: Subject to change without notice
www.triquint.com