TQM829007 Datasheet, PDF (1/12 Pages) TriQuint Semiconductor – 0.6-1.0GHz ¼W Digital Variable Gain Amplifier

TQM829007
0.6-1.0GHz ¼W Digital Variable Gain Amplifier
Applications
• 3G / 4G Wireless Infrastructure
• CDMA, WCDMA, LTE
• Repeaters
• ISM Infrastructure
Product Features
• 0.6-1.0 GHz Frequency Range
• 31.5 dB Maximum Gain at 0.9 GHz
• 31.5 dB Gain Range in 0.5 dB Steps
• +40 dBm Output IP3
• +24.3 dBm Output P1dB
• 2.1 dB Noise Figure at Max. Gain State
• Fully Internally Matched Module
• Integrated Blocking Capacitors, Bias Inductors
• 3-wire SPI Control Programming
28-pin 6x6mm leadless SMT package
Functional Block Diagram
LE 1
DATA 2
CLK 3
NC 4
GND 5
RFIN 6
GND 7
S
P _DSA
I
AMP1
DC Biasing
Matching
DC Biasing
21 GND
20 GND
19 GND
18 GND
17 GND
16 RFOUT
15 GND
Backside
Paddle - GND
General Description
The TQM829007 is a digital variable gain amplifier
(DVGA) featuring high linearity performance in a fully
integrated module. The amplifier module features the
integration of a low noise amplifier gain block, a digital-
step attenuator (DSA), along with a high linearity ¼W
amplifier. The module has the added features of integrating
all matching components with bias chokes and blocking
capacitors. The internal DSA offers 0.5 dB step, 6-bit, and
31.5 dB range and is controlled with a serial periphery
interface (SPI^TM).
The TQM829007 features variable gain from 0 to 31.5 dB
at 0.9 GHz, has +40 dBm Output IP3, and +24.3 dBm
P1dB. The amplifier also has a very low 2.1 dB Noise
Figure (at maximum gain) allowing it to be an ideal DVGA
for both receiver and transmitter applications. The
amplifier operates from a single +5V supply and is
available in a compact 28-pin 6x6 mm leadless SMT
package.
The TQM829007 is pin compatible with the TQM879006
(1.4-2.7GHz, 0.25W DVGA) and TQM879008 (1.5-2.7
GHz, 0.5W DVGA). This allows one to size the right type
of device for specific system level requirements as well as
making the DVGA family ideal for applications where a
common PCB layout is used for different frequency bands.
Pin Configuration
Pin #
1
2
3
4, 22
6
8
14
16
28
All Other Pins
Symbol
LE
DATA
CLK
NC
RFIN
VCC_AMP1
VCC_AMP2
RFOUT
VCC_SPI
GND
Ordering Information
Part No.
TQM829007
Description
0.6-1.0 GHz Digital Variable Gain Amp
TQM829007-PCB
Fully Assembled Evaluation Board
Includes USB control board (EVH)
Standard T/R size = 2500 pieces on a 13” reel.
Data Sheet: Rev F 04/27/12
© 2012 TriQuint Semiconductor, Inc.
- 1 of 12-
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network^®