TQM7M9053_15 Datasheet, PDF (1/1 Pages) TriQuint Semiconductor – Quad band GSM-EDGE and Tri-Band W/CDMA/HSPA/LTE

TQM7M9053
(Quad band GSM-EDGE and Tri-Band W/CDMA/HSPA+/LTE)
Applications
 GSM/EDGE/WEDGE Applications
 WCDMA B1/8 or B1/5 Applications
 WCDMA B1/5/8 Applications (w/ external switch)
 HSDPA/HSUPA/HSPA+ Applications
 LTE Applications / EVDO revA/B B1&B5
Product Features
 Quad-Band Linear GSM/EDGE
 UMTS B1 and B5/8
 Input power controlled – GMSK and 8PSK
 GSM LB has 2 modes – HP, LP
 GSM HB has 2 modes – HP, LP
 W/CDMA has 2 modes – HP, MP
 HBT/PHEMT / CuFlip^® PA Technology
 Integrated coupler
 Built-in voltage regulator
 50Ω input and Output Impedance
 Lead-free 260°C / RoHS / Halogen-free
 24 Pin 5x7.5*0.89mm Package
Functional Block Diagram
RF IN UMTS HB
RF IN GSM HB
RF IN GSM LB
RF IN UMTS LB
CPL OUT
B1 PA
B8 PA
DCS/PCS PA
GSM850/900 PA
CPL IN
RF OUT UMTS HB
RF OUT UMTS LB
RF OUT GSM HB
RF OUT GSM LB
General Description
Ordering Information
The TQM7M9053 is a fully matched multimode multiband Power
Amplifier Module that supports Quad-band GSM/EDGE Linear,
W/CDMA & LTE Band 1, and low band WCDMA/LTE (externally
tuned for either Band 5 or Band 8). The GSM PA output power is
controlled by the input power coming from the transceiver in both
GMSK and 8PSK modes.
The 2-Gain state WCDMA PA operates in HPM and MPM to
maximize talk time over the entire range of operating conditions.
It also includes a coupler and built-in regulator, ideal for today’s
extremely small data enabled phones. The TQM7M9053 is
designed on TriQuint’s GaAs HBT technology with CuFlip®
assembly offering state of the art reliability, temperature stability
and ruggedness. Its RF performance meets the stringent
linearity requirements for multi-mode operation.
Part No.
Description
TQM7M9053
QB EDGE+ Tri-Band WCDMA MM PA
Standard T/R size = 2,500 pieces on a 7” reel.
Data Sheet: Revision D, March 2013
© 2013 TriQuint
- 1 of 18 -
Disclaimer: Subject to change without notice
www.triquint.com