TQM613029_15 Datasheet, PDF (1/14 Pages) TriQuint Semiconductor – Tritium II PA-Duplexer Module CDMA Cellular Band

TQM613029
Data Sheet
Tritium II PA-Duplexer Module^™ CDMA Cellular Band
Functional Block Diagram
GND
V_EN
V_MODE2
V_MODE1
GND
Rx
Tx IN
GND
GND
GND
GND
ANT
GND
GND
GND
V_CC
CPL
Out
CPL
In
GND
GND
Product Description
The TQM613029 is a fully matched CDMA cellular band PA-Duplexer module for
use in mobile phones as part of TriQuint’s Tritium II product family. The module is
designed with a focus on size, current consumption and phone layout simplicity.
Within a compact area of only 28mm², the module integrates a single-ended
transmit filter, duplexer, high efficiency PA die, RF power coupler, matching and
built in voltage regulator functionality eliminating the need for external switch
circuitry. With an RF power output up to 25dBm the TQM613029 meets the strict
ACPR/ALTR requirements of multi-band, feature-rich CDMA2000 handset
designs.
The module will provide the lowest overall current consumption available in the
market based on the current sub-urban CDG (CDMA Development Group) curve
by providing a 3 Gain state amplifier. In Low-Power mode operation a quiescent
current of only 5mA will allow the module to achieve an overall average current of
less than 50mA. The pin layout is optimized for use with new CDMA discrete and
packaged transceiver solutions although its operation is backwards compatible
with existing chipsets.
Electrical Specifications
Test Conditions VCC=3.4V, VEN=High, T=25ºC
Parameter
Frequency
Max POUT
ACPR (±885kHz offset) at Max POUT
ALTR (±1.98MHz offset) at Max POUT
Current Consumption (at +25dBm Pout)
Quiescent Current in LPM
Leakage at Rx Port
Rx Noise
Absolute Maximum Ratings
Typ
824 - 848
26
-50
-60
380
5
-30
-183
Units
MHz
dBm
dBc
dBc
mA
mA
dBm
dBm/Hz
Data Sheet
For additional information and latest specifications, see our website: www.triquint.com
Revision H, August 5, 2009
Features
• Compact 7.0x4.0x1.1mm module replacing
more than 12 discrete components
• Integrated duplexer, single-ended Tx filter,
PA die, RF power coupler and matching
• Built-in voltage regulator functionality
eliminating any external switch circuitry
• High efficiency three gain state PA for
lowest overall current consumption
• Typical quiescent current values:
Low Power Mode (LPM) = 5mA
Medium Power Mode (MPM) = 20mA
High Power Mode (HPM) = 80mA
• Low Current Consumption
Typical: 380 mA @ +25dBm
Typical: 23 mA @ +8dBm
• Excellent ACPR
Typical: -50 dBc @ +/- 885kHz offset
• Excellent ALTR
Typical: -60 dBc @ +/- 1.98 MHz offset
• Lead-free 260°C RoHS Compliant
• Halogen Free (HF)
Applications
• IS-95/98/CDMA2000
• EVDO Rev A Compliant
Package Style
TOP VIEW (through package)
GND
V_EN
V_MODE2
V_MODE1
GND
Rx
Tx IN
GND
GND
GND
20 GND
ANT
1 GND
GND
GND
V_CC
CPL
Out
CPL _{GND GND}
In
1