TQM613017 Datasheet, PDF (1/1 Pages) TriQuint Semiconductor – PowerPadTM CDMA/AMPS Cellular Band PA/Duplexer Module

TQM613017
Data Sheet
PowerPad^TM CDMA/AMPS Cellular Band PA/Duplexer Module
Functional Block Diagram
Product Description
TriQuint’s TQM613017 is a fully matched PA/Duplexer, Front End Module (FEM)
for CDMA/AMPS use in mobile phones. The 8 x 5 x 1.52 mm, 22-pin module
includes an integrated SAW Duplexer, Power Amplifier, Transmit filter, RF Power
Detector and Logic Controller. With an RF Power Output up to 25.5dBm the
TQM613017 FEM meets the strict ACPR and ALTR requirements for products
designed to the IS-95/98 standards. The quiescent current of the PA/Duplexer is
set by the base-band processor using a 1-bit bias control (Vmode) to minimize
battery consumption and maximize talk time.
TriQuint’s multilayer laminate technology provides low loss interconnect and
optimized match between the duplexer, PA and filter enabling the TQM613017 to
achieve typically 430 mA current consumption at maximum output power
(+25.5dBm). The small 8.0 × 5.0 mm module replaces four separate components
requiring less board space. TQM613107 provides handset designers with a simple
to use surface mount module requiring minimal external circuitry in the new
generation of small and light phones.
Electrical Specifications
Parameter
Min Typ
Max Units
Frequency
824 836.5 849 MHz
CDMA Mode Pout¹
+25.5
dBm
CDMA Mode ACPR (+/- 885kHz offset)¹
-51
dBc
CDMA Mode ALTR (+/- 1.98 MHz offset)¹
-59
dBc
CDMA Mode Current Consumption¹
460
mA
CDMA Mode Leakage¹
-30
dBm
ANT-to-Rx Insertion Loss
2.8
dB
Rx Noise
-181
dBm/Hz
Note 1: Test Conditions VCC=3.4 V, VREF =2.85 V, T=+25°C
Absolute Maximum Ratings ¹
Data Sheet:
For additional information and latest specifications, see our website: www.triquint.com
Revision D, April 30, 2007
Features
• InGaP GaAs HBT PA
• Low Current Consumption
Typical: 460mA @ +25.5dBm
• Low Quiescent Current
Typical: 40mA
• 1-Bit Bias Control for Extended Talk Time
• Integrated power detector
• Integrated duplexer and interstage filter
• Excellent ACPR
Typical: -51 dBc @ +/- 885kHz offset
• Excellent ALTR
Typical: -60 dBc @ +/- 1.98 MHz offset
• Low Voltage Operation 1.3 V to 4.4 V
• Small Profile 22 pins, 8.0 x 5.0 x 1.52 mm
• Reduced Phone Board Space
Replaces 4 Separate Components
• Easy to use with few External Components
Internally matched inputs and outputs
Applications
• IS-95/CDMA2000
• Single-Mode, Dual Mode, and Tri Mode
CDMA/AMPS phones
Package Style
TQM613017
Top View Through Package
VREF
1