TQF9046_15 Datasheet, PDF (1/1 Pages) TriQuint Semiconductor – 802.11b/g/n BT WLAN Front End Module

TQF9046
802.11b/g/n + BT WLAN Front End Module
Applications
• IEEE802.11b/g/n WLAN + BT Applications
• Single-Chip RF Front-end Module
• Wireless LAN Systems
• Portable Battery-Powered Equipment
Product Features
• Fully Integrated, 802.11b/g/n +BT front-end module
• Internally matched input/output
• Integrated directional detector
• Temperature Compensated Bias Network
• Single battery voltage of 3.2V- 4.6V
• Leadless 2.5 x 2.5 x 0.40 mm SMT Pb-Free
• Typ. Pout (+25C, V_DD = +3.8V) = 19.3dBm,
EVM=3.0%, 802.11n/MCS7
• Typ. Pout (+25C, V_DD = +3.8V) = 20.2dBm,
EVM=4.6%, 64QAM, 54Mbps OFDM
General Description
The TQF9046 is full WLAN front-end module in an ultra
small 2.5mm x 2.5mm footprint package for 802.11b/g/n +
BT applications. The TQF9046 contains 2.4GHz PA,
directional detector, front-end SP3T switch, and LNA with
bypass mode. The architecture and interface are optimized
for next generation WLAN integration into handset
devices.
The front-end module features CMOS compatible control
voltages to facilitate ease of use. With its low power
dissipation, the front-end Module contributes to the
extended battery life of next generation WLAN solutions.
The front-end module is manufactured in TriQuint’s high-
reliability E/D pHEMT technology and is assembled in
ultra thin profile 2.5mm x 2.5mm x 0.40mm QFN - 16 Pb-
Free package.
Functional Block Diagram
Pin Configuration
Pin #
7, 12, 15, 17
1
2
3
4
5
6
8
9
10
11
13
14
16
Symbol
GND
Detector Pin for 2.4G TX
Spare
Vdd3, DC supply pin for 2.4GHz PA(final stage)
Vdd2, DC supply pin for 2.4GHz PA(1st stage) and PA
logic and regulator
Tx
PA_Enable
Rx
LNA_Enable
Vdd1, DC supply pin for 2.4GHz LNA and Switch logic
Bluetooth port
Vcontrol 1
Vcontrol 2
ANT
Ordering Information
Part No.
TQF9046
Description
Packaged part
Standard T/R size = 2.5K pieces on a 7” reel.
Data Sheet: Rev C 03/10/13
© 2013 TriQuint
- 1 of 16 -
Disclaimer: Subject to change without notice
www.triquint.com