TGC2610-SM_15 Datasheet, PDF (1/17 Pages) TriQuint Semiconductor – 10 GHz – 15.4 GHz Downconverter

Applications
 VSAT
 Point-to-Point Radio
 Test Equipment & Sensors
Product Features
 RF Frequency Range: 10 – 15.4 GHz
 IF Frequency: DC – 4 GHz
 LO Frequency: 6 – 19 GHz
 LO Input Power: 0 to 8 dBm
 Input IP3: 2 dBm
 Conversion Gain: 14 dB
 Noise Figure: ≤ 2.5 dB
 Package Dimensions: 5.0 x 5.0 x 1.3 mm
TGC2610-SM
10 GHz – 15.4 GHz Downconverter
28-pin 5x5 mm QFN package
Functional Block Diagram
General Description
The TriQuint TGC2610-SM is a Ku-Band Image
Reject Downconverter. The TGC2610-SM operates
over an RF frequency range of 10 to 15.4 GHz and
LO from 6 to 19 GHz with IF outputs from DC to 4
GHz. This part is designed using TriQuint’s pHEMT
production process.
The TGC2610-SM integrates an LNA, and image
reject mixer driven by an LO buffer amplifier. It
typically provides an Input IP3 of 2 dBm at –25 dBm
input power per tone and has a conversion gain of 14
dB and noise figure of 2.5 dB or less.
The TGC2610-SM is available in a low-cost, surface
mount 28 lead 5x5 mm QFN package and is ideally
suited for Point-to-Point Radio, and Ku-Band VSAT
Ground Terminal applications.
Lead-free and RoHS compliant.
Evaluation Boards are available upon request.
Pin Configuration
Pin No.
1, 2, 4, 6, 7, 8, 12, 14, 15,
16, 18, 20, 21, 22, 23, 25,
26, 27, 28
3
5
9
10, 11
13
17
19
24
Label
GND
RF IN
VGX
LO IN
NC
VDLO
IFOUT_LSB
IFOUT_USB
VDLNA
Ordering Information
Part No. ECCN Description
TGC2610-SM
EAR99
10 GHz – 15.4 GHz
Downconverter
Standard T/R size = 500 pieces on a 7” reel
Preliminary Datasheet: Rev D 8-13-14
© 2014 TriQuint
- 1 of 17 -
Disclaimer: Subject to change without notice
www.triquint.com