TAT7464_15 Datasheet, PDF (1/6 Pages) TriQuint Semiconductor – CATV 75 HEMT Dual RF Amplifier

TAT7464
CATV 75 Ω pHEMT Dual RF Amplifier
Applications
• V-ONU receiver output stage
• Multi-Dwelling Units
• Edge QAM
• Push-pull high-output stage
• SAT frequency distribution
Product Features
 50-2600 MHz bandwidth
 pHEMT device technology
 Simple external tuning allows excellent return loss
 5 V supply voltage
 210 mA typical current consumption
 Easy bias current adjustment
 11.7 dB typical gain
 4.4 dB typical NF from 50 MHz to 1300 MHz
 38 dBm typical OIP3
 73 dBm typical OIP2
 21 dBm typical P1dB
 Low distortion: CSO -83 dBc, CTB -75 dBc,
XMOD -68 dBc (33 dBmV/ch at output, 80 ch)
 SOIC-8 package
General Description
The TAT7464 is a 75 Ω RF Amplifier designed for use
from 50 MHz to 2600 MHz, addressing the CATV and
Satellite bands in a single part. The TAT7464 contains
two separate amplifiers for push pull applications. It
provides an easy means for adjusting bias current
allowing designers to optimize power consumption for
high efficiency applications. The TAT7464 is fabricated
using 6-inch GaAs pHEMT technology to optimize
performance and cost.
SOIC-8 package
Functional Block Diagram
RF IN ¹
2
3
RF IN ⁴
8 _{RF OUT}
7
6
5 _{RF OUT}
Pin Configuration
Pin #
1
2, 3, 6, 7
4
5
8
Exposed Slug
Symbol
RF IN
No Connect
RF IN
RF OUT
RF OUT
GND
Data Sheet: Rev G 07-23-13
© 2011 TriQuint Semiconductor, Inc.
Ordering Information
Part No.
Description
TAT7464
TAT7464-EB
75 Ω Dual pHEMT Amplifier
(lead-free/RoHS compliant SOIC-8 Pkg)
Amplifier Evaluation Board
Standard T/R size = 1000 pieces on a 7” reel.
- 1 of 6 -
Disclaimer: Subject to change without noticee
Connecting the Digital World to the Global Network^®