QPM1000 Datasheet, PDF (1/11 Pages) TriQuint Semiconductor – 2 -20 GHz Limiter/Low-Noise Amplifier

Applications
• Receiver Front End Building Block
QPM1000
2 -20 GHz Limiter/Low-Noise Amplifier
Product Features
• Frequency Range: 2 – 20 GHz
• Input Power CW Survivability: 4 W
• Gain: > 17 dB
• Adjustable gain (> 30 dB using VG2)
• Noise Figure: < 2.0 dB (3-12 GHz)
< 4.0 dB (outer frequencies)
• IM3: < −21 dBc (PIN ≤ 0 dBm)
• Bias: VD = 5 V, ID = 100 mA, VG1 = -0.6 V typical,
VG2 = +1.3 V
• Package dimensions: 6.00 x 5.00 x 1.72 mm
Functional Block Diagram
General Description
The Qorvo QPM1000 is an integrated limiter/LNA
providing robust, high performance over the 2–20GHz
frequency range. The QPM1000 delivers 17 dB small
signal gain with gain control and > 18 dBm P1dB with a
range of noise figure of 1.5–4 dB across frequency. In
addition, the integrated limiter provides a robustness
level of up to 4 W of incident power without performance
degradation.
The QPM1000 is packaged in an air cavity, laminate-
based 6 x 5 mm QFN for easy handling. With a small
form factor coupled with both ports matched to 50 ohms
and DC blocked, the QPM1000 is ideally suited to
support both commercial and defense related
applications where robust receiver front ends are
required.
Lead-free and RoHS compliant.
Evaluation boards are available upon request.
Pad Configuration
Pad No.
1, 3, 10, 12, 19
2
4 – 8, 13, 15, 16, 18
9
11
14
17
Symbol
GND
RF Input
NC
VG1
RF Output
VD
VG2
Ordering Information
Part
QPM1000
ECCN
EAR99
Description
2 – 20 GHz
Limiter/LNA
Datasheet: Rev - 12-11-15
© 2015 TriQuint
- 1 of 11 -
Disclaimer: Subject to change without notice
www.triquint.com, www.qorvo.com