ECG055B-G_15 Datasheet, PDF (1/7 Pages) TriQuint Semiconductor – InGaP HBT Gain Block

Applications
 Wireless Infrastructure
 CATV / SATV / MoCA
 Point to Point
 Defense & Aerospace
 Test & Measurement Equipment
 General Purpose Wireless
Product Features
 DC – 6 GHz
 +18 dBm P1dB at 1 GHz
 +34 dBm OIP3 at 1 GHz
 20.5 dB Gain at 1 GHz
 3.4 dB Noise Figure
 Available in Lead-free / SOT-89 Package Style
 Internally matched to 50 Ω
ECG055B-G
InGaP HBT Gain Block
SOT-89 Package Style
Functional Block Diagram
General Description
The ECG055B-G is a general-purpose buffer amplifier
that offers high dynamic range in a low-cost surface-
mount package. At 1000 MHz, the ECG055B-G typically
provides 20.5 dB of gain, +34 dBm Output IP3, and
+18 dBm P1dB.
The ECG055B-G consists of Darlington pair amplifiers
using the high reliability InGaP / GaAs HBT process
technology and only requires DC-blocking capacitors, a
bias resistor, and an inductive RF choke for operation.
The device is ideal for wireless applications and is
available in low-cost, surface-mountable plastic
lead-free / RoHS-compliant SOT-89 packages. A
SOT-86 version is also available as the ECG055C. All
devices are 100% RF and DC tested.
The broadband MMIC amplifier can be directly applied to
various current and next generation wireless
technologies such as GPRS, GSM, CDMA, and W-
CDMA. In addition, the ECG055B-G will work for other
various applications within the DC to 6 GHz frequency
range such as CATV and mobile wireless.
Pin Configuration
Pin No.
1
2
3
Backside Paddle
Label
RF IN
GND
RF OUT / VCC
GND
Ordering Information
Part No.
ECG055B-G
Description
InGaP HBT Gain Block
Standard T/R size = 1000 pieces on a 7” reel
Datasheet: Rev B 12/07/14
© 2014 TriQuint
- 1 of 7 -
Disclaimer: Subject to change without notice
www.triquint.com