ECG008B-G_15 Datasheet, PDF (1/7 Pages) TriQuint Semiconductor – InGaP HBT Gain Block

ECG008B-G
InGaP HBT Gain Block
Applications
 Wireless Infrastructure
 CATV / SATV / MoCA
 Point to Point
 Defense & Aerospace
 Test & Measurement Equipment
 General Purpose Wireless
Product Features
 DC – 4 GHz
 +24 dBm P1dB at 1 GHz
 +40 dBm OIP3 at 1 GHz
 15 dB Gain at 1 GHz
 4.6 dB Noise Figure
 Internally matched to 50 Ω
 Lead-free / green / RoHS-Compliant SOT-89 Package
ECG008B-G
SOT-89 Package Style
Functional Block Diagram
Backside Paddle - GND
1
RF IN
2
3
GND RF OUT / V_CC
General Description
The ECG008B-G is a general-purpose buffer amplifier
that offers high dynamic range in a low-cost surface-
mount package. At 1000 MHz, the ECG008B-G typically
provides 15 dB of gain, +40 dBm Output IP3, and
+24 dBm P1dB.
The ECG008B-G consists of Darlington pair amplifiers
using the high reliability InGaP / GaAs HBT process
technology and only requires DC-blocking capacitors, a
bias resistor, and an inductive RF choke for operation.
The device is ideal for wireless applications and is
available in a lead-free/green/RoHS-compliant SOT-89
package. All devices are 100% RF and DC tested.
Pin Configuration
Pin No.
1
2
3
Backside Paddle
Label
RF IN
GND
RF OUT / VCC
GND
This broadband MMIC amplifier can be directly applied
to various current and next generation wireless
technologies. In addition, the ECG0038B-G will satisfy
general amplification requirements in the DC to 4 GHz
frequency range such as CATV and mobile wireless.
Ordering Information
Part No.
Description
ECG008B-G
InGaP HBT Gain Block
ECG008B-PCB
500 – 4000 MHz Evaluation Board
Standard T/R size = 1000 pieces on a 7” reel
Datasheet: Rev B 12/04/14
© 2014 TriQuint
- 1 of 7 -
Disclaimer: Subject to change without notice
www.triquint.com