ECG006C_15 Datasheet, PDF (1/4 Pages) TriQuint Semiconductor – InGaP HBT Gain Block

ECG006C
InGaP HBT Gain Block
Product Features
• DC – 5.5 GHz
• 15 dB Gain @ 1 GHz
• +15.5 dBm P1dB @ 1 GHz
• +32 dBm OIP3 @ 1 GHz
• 3.7 dB Noise Figure
• Internally matched to 50 Ω
• Robust 1000V ESD, Class 1C
• Lead-free/RoHS-compliant SOT-
86 Package
Applications
• Mobile Infrastructure
• CATV / FTTX
• WLAN / ISM
• RFID
• WiMAX / WiBro
Product Description
Functional Diagram
The ECG006C is a general-purpose buffer amplifier that
offers high dynamic range in a low-cost surface-mount
package. At 1000 MHz, the ECG006C typically provides
15 dB of gain, +32 dBm Output IP3, and +15.5 dBm P1dB.
GND
4
RF In
1
RF Out
3
The ECG006C consists of a Darlington-pair amplifier using
the high reliability InGaP/GaAs HBT process technology
and only requires DC-blocking capacitors, a bias resistor,
and an inductive RF choke for operation. The device is
ideal for wireless applications and is available in low-cost,
surface-mountable plastic lead-free/RoHS-compliant SOT-
86 packages. All devices are 100% RF and DC tested.
The broadband MMIC amplifier can be directly applied to
various current and next generation wireless technologies
such as GPRS, GSM, CDMA, and W-CDMA. In addition,
the ECG006C will work for other various applications
within the DC to 5.5 GHz frequency range such as CATV
and mobile wireless.
2
GND
Function
Input
Output/Bias
Ground
Pin No.
1
3
2, 4
Specifications ⁽¹⁾
Parameter
Operational Bandwidth
Test Frequency
Gain
Output P1dB
Output IP3 ⁽²⁾
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 ⁽²⁾
Noise Figure
Device Voltage
Device Current
Units
MHz
MHz
dB
dBm
dBm
MHz
dB
dB
dB
dBm
dBm
dB
V
mA
Min
DC
12.8
+12
3.5
Typ
1000
15
+15.5
+32
2000
14.5
18
14
+15
+32
4.0
3.9
45
Max
5500
16.2
4.3
1. Test conditions unless otherwise noted: 25º C, Supply Voltage = +5 V, Rbias = 24.3 Ω, 50 Ω System.
2. 3OIP measured with two tones at an output power of +2 dBm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Typical Performance ⁽¹⁾
Parameter
Frequency
S21
S11
S22
Output P1dB
Output IP3 ⁽²⁾
Noise Figure
Units
MHz
dB
dB
dB
dBm
dBm
dB
500
15.2
-14
-12
+15.8
+32
3.7
Typical
900 1900
15 14.5
-14 -17
-12.5 -14
+15.4 +15
+32 +30
3.7 3.7
2140
14.4
-18
-14.5
+15
+30
3.7
Absolute Maximum Rating
Parameter
Storage Temperature
Device Current
RF Input Power (continuous)
Thermal Resistance
Junction Temperature
Rating
-55 to +150 °C
150 mA
+12 dBm
233 °C/W
+160 °C
Ordering Information
Part No.
ECG006C-G
ECG006C-PCB
Description
InGaP HBT Gain Block
(lead-free/RoHS-compliant SOT-86 package)
700 – 2400 MHz Fully Assembled Eval. Board
Operation of this device above any of these parameters may cause permanent damage.
Standard tape / reel size = 1000 pieces on a 7” reel.
Specifications and information are subject to change without notice
TriQuint Semiconductor, Inc • Phone 1-800-WJ1-4401 • FAX: [phone] • e-mail: [e-mail] • Web site: www.TriQuint.com
Page 1 of 4 February 2009