ECG001F-G_15 Datasheet, PDF (1/6 Pages) TriQuint Semiconductor – InGaP HBT Gain Block

Applications
• Wireless Infrastructure
• CATV / SATV / MoCA
• Point to Point
• Defense & Aerospace
• Test & Measurement Equipment
• General Purpose Wireless
Product Features
• DC – 6 GHz
• 22 dB Gain at 1 GHz
• +12.5 dBm P1dB at1 GHz
• +25 dBm OIP3 at 1 GHz
• 3.4 dB Noise Figure
• Internally Matched to 50 Ω
• Lead-free / green / RoHS-Compliant SOT-363 Package
ECG001F-G
InGaP HBT Gain Block
ECG001F-G
6 Pin SOT-363 Package
Functional Block Diagram
General Description
The ECG001F-G is a general-purpose buffer amplifier
that offers high dynamic range in a low-cost surface-
mount package. At 1000 MHz, the ECG001F-G typically
provides 22 dB of gain, +25 dBm Output IP3, and
+12.5 dBm P1dB.
Pin Configuration
Pin No.
3
6
1, 2, 4, 5
Label
RF IN
RF OUT
GND
The ECG001F-G consists of a Darlington-pair amplifier
using the high reliability InGaP / GaAs HBT process
technology and only requires DC-blocking capacitors, a
bias resistor, and an inductive RF choke for operation.
The device is ideal for wireless applications and is
available in a low-cost, surface-mountable lead-
free / green / RoHS-compliant SOT-363 package. All
devices are 100% RF and DC tested.
This broadband MMIC amplifier can be directly applied
to various current and next generation wireless
technologies. In addition, the ECG001F-G will satisfy
general amplification requirements in the DC to 6 GHz
frequency range such as CATV and mobile wireless.
Ordering Information
Part No.
Description
ECG001F-G
InGaP / GaAs HBT Gain Block
Standard T/R size = 3000 pieces on a 7” reel
Datasheet: Rev. A 12-05-14
© 2014 TriQuint
- 1 of 6 -
Disclaimer: Subject to change without notice
www.triquint.com