AUNA-202 Datasheet, PDF (1/2 Pages) TriQuint Semiconductor – 1.0 W 14-16 Volts, DC- 200MHz

AUNA-202
1.0 W 14-16 Volts, DC- 200MHz
Introduction
The AUNA-202 is a 50 Ohm hybrid amplifier module
designed for broadband operation in Class A
amplifier driver applications operating from DC to
200MHz. Its wide dynamic range and flexibility make
it ideal for a broad spectrum of instrurmentation,
receiver, and transmitter applications.
Features
- Gold Metalized
- Internally matched to 50 Ohms
- Caccadeable
- Wide dynamic range
Symbol
Ga
Delta Ga
P1dB
VSWR
Vdc
Delta Tjf
NF
IP3
T Oper.
T Stor.
ELECTRICAL CHARACTERISTICS at Tcase = 25 Deg C.
Characteristics
Min. ^Typ.
Max. Units
Test Conditions
Small signal Gain
Gain Flatness
12.0 13.0
dBm
+/- 0.5
+/- 1
dB
Freq = 1 -200MHz
Idc = 350mA
Pout @ 1dB Comp.
+30 +32
dBm
Input Mismatch
1.5:1
2.0:1
Operating voltage
14.0 15.0
16.0
Volts
Temp. Rise Junction
to Flange
Noise Figure
3rd Order Intercept
Operating Temp.
+50
5.0
+50
-55
+125
C
dBm
dBm
Deg C
Freq = 70MHz
Idc = 350mA
Freq = 30 MHz
Idc = 350mA
Storage Temp
-55
+150
Deg C
1
Caution: Device contains Beryllium Oxide
* Stresses in excess of the absolute maximum ratings can cause
permanent damage to the device. These are absolute stress rat-
ings only. Functional operation of the device is not implied at
these or any other conditions in excess of those given in the
operational sections of the data sheet. Exposure to absolute
maximum ratings for extended periods can adversely affect
device reliability.