SMART5000RT3U_15 Datasheet, PDF (2/5 Pages) Tripp Lite. All Rights Reserved – SmartPro 208-120V 5kVA 4kW Line-Interactive Sine Wave UPS, Extended Run, SNMP, Webcard, 6U Rack-Tower, USB, DB9 Serial

Hot-swappable/user replaceable external battery pack(s) allow on-site battery replacement without powering off connected equipment or removing the
UPS from the rack
UPS external battery pack ships fully assembled and ready for connection to the power module, no time consuming, connection of individual internal
batteries by user is necessary
Specifications
OUTPUT
Output Capacity Details
Supports 4800 watts maximum with user supplied 50A input plug or hardwire input connection
Output Volt Amp Capacity (VA)
5000
Output kVA Capacity (kVA)
5
Output Watt Capacity (Watts)
4000
Output kW Capacity (kW)
4
Power Factor
0.8
Nominal Output Voltage(s)
Supported
120V; 208V
Frequency Compatibility
60 Hz
Output Voltage Regulation (Line
Mode)
208 & 120V (-10%, +20%)
Output Voltage Regulation (Battery
Mode)
+/- 5%
Output Receptacles
(10) 5-15R; (2) 5-15/20R; (1) L14-30R; (1) L6-30R
Load Management Receptacles
Eight switchable single-outlet 5-15R load banks
Output Circuit Breakers
15A branch rated (x3) - 2 breakers support 5 5-15R outlets each, one breaker supports 2 5-20R outlets, L6-30R and
L14-30R outlets are unbreakered
Output AC Waveform (AC Mode)
Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
INPUT
Rated input current (Maximum Load) 24A max. in factory L6-30P configuration; 27A max. when powered by 50A plug or hardwire input
Nominal Input Voltage(s) Supported 208V AC
UPS Input Connection Type
L6-30P
Input Circuit Breakers
30A double-pole
UPS Input Cord Length (ft.)
10
UPS Input Cord Length (m)
3
Recommended Electrical Service
30A 208V
Input Phase
Single-Phase
2/5