PDU12IEC_15 Datasheet, PDF (2/3 Pages) Tripp Lite. All Rights Reserved – 1.6-3.8kW Single-Phase Basic PDU, 100-240V Outlets (12-C13 and 2-C19), C20 16A Inlet, 1U Rack-Mount

Output Capacity Details
Frequency Compatibility
Output Receptacles
Output Nominal Voltage
Overload Protection
Outlet Type
1.9kW (120V), 2.0kW (127V), 1.6kW (100V), 3.3kW (208V), 3.5kW (220V), 3.7kW (230V), 3.8kW (240V), 3.2kW
(200V); 16A maximum
50 / 60 Hz
(12) C13; (2) C19
100-240V nominal, single phase
16A
IEC-C13, IEC-C19
INPUT
PDU Input Voltage
Recommended Electrical Service
Maximum Input Amps
PDU Plug Type
Input Cord Details
Input Phase
100; 120; 127; 200; 208; 220; 230; 240
20A 120V; 20A 208/240V; 16A 230V
16
IEC-320 C20
C20 inlet accepts user supplied input cable with C19 output connection
Single-Phase
USER INTERFACE, ALERTS & CONTROLS
Switches
No power switch
PHYSICAL
Shipping Dimensions (hwd / in.)
Shipping Dimensions (hwd / cm)
Shipping Weight (lbs.)
Shipping Weight (kg)
Unit Dimensions (hwd / in.)
Unit Dimensions (hwd / cm)
Unit Weight (lbs.)
Unit Weight (kg)
Material of Construction
Form Factors Supported
PDU Form Factor
Outlets Measurement (Center to
Center)
2.5 x 20.25 x 10
6.35 x 51.4 x 25.4
3.8
1.73
1.75 x 17.5 x 4.5
4.4 x 44.5 x 10.8
3.2
1.45
Metal
1U rackmount, 0U vertical rackmount, wall-mount and undercounter installation supported
Horizontal (1U, 2U, etc)
Distance between Front (C13) outlets = 28.75mm; Distance between Rear (C19) outlets = 55mm; Distance between
Rear (C13) outelts = 28.75mm
ENVIRONMENTAL
Storage Temperature Range
Relative Humidity
5 to 122F (-15 to 50C)
5-95% non-condensing
2/3