BCPRO600_15 Datasheet, PDF (2/4 Pages) Tripp Lite. All Rights Reserved – BC Pro 120V 600VA 345W Standby UPS, Tower,USB port, 6 Outlets

Front panel LEDs indicate line / battery mode and battery replace status; Audible alarm with alarm cancel / self-test button
Hot swappable user battery replacement
Optional PDUB15 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment
Small tower housing supports desk or floor placement
Specifications
OUTPUT
Output Volt Amp Capacity (VA)
600
Output Watt Capacity (Watts)
345
Nominal Output Voltage(s)
Supported
115V; 120V
Frequency Compatibility
60 Hz
Output Voltage Regulation (Battery
Mode)
115V (+/- 5%)
Output Receptacles
(6) 5-15R
UPS Output Receptacles (Surge
Suppression Only)
3 UPS outlets, 3 surge-only outlets
Hot-Swap PDU options
PDUB15 (2U / 8 5-15R outlets)
Output AC Waveform (AC Mode)
Sine wave
Output AC Waveform (Battery Mode) PWM sine wave
INPUT
Rated input current (Maximum Load) 12A
Nominal Input Voltage(s) Supported 120V AC
UPS Input Connection Type
5-15P
UPS Input Cord Length (ft.)
6
UPS Input Cord Length (m)
1.8
Recommended Electrical Service
15A 120V
Input Phase
Single-Phase
BATTERY
Full Load Runtime (min.)
Half Load Runtime (min.)
DC System Voltage (VDC)
Battery Recharge Rate (Included
Batteries)
Internal UPS Replacement Battery
Cartridge
5.7 min. (345w)
14.5 min. (175w)
12
Less than 4.5 hours from 10% to 90%
RBC51
2/4