B07001619IP Datasheet, PDF (2/4 Pages) Tripp Lite. All Rights Reserved – NetCommander 16-Port Cat5 IP Rack-Mount Console KVM Switch 1plus1 User with 19-in. LCD

for easy, one person installation. Fits into any rack from 27" to 42" deep. 2-post rackmounting available using
Tripp Lite's B019-000. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule Purchases
remotely access the KVM via
Internet Explorer, Firefox, or
Chrome browsers
Features
Linux operating systems can
16-Port, 1+1 User NetCommander Cat5 IP KVM Switch with Built-In 19" LCD Console
remotely access the KVM via
Directly connect up to 16 computers/servers
Firefox or Chrome browsers
Connected computers/servers can be located up to 100 ft. (30 m.) away from the KVM using inexpensive
Cat5e/6 cabling and B078-101-USB2, B078-101-USB-1, or B078-101-PS2 SIUs
Hardware Versions
Simultaneous support for 2 users (1 local, 1 remote)
A new hardware version (v2) of the
Java-based application allows for control of a target server via web browser from any location over a secure
B070-016-19-IP was released in 2014,
IP connection
and it requires different firmware than
Multi-Level account access – Administrator and User accounts can be created, with a password being
was used in the previous version (v1).
required to access the KVM switch and your assigned permissions. Administrator accounts have full access,
In the Support tab on this web page
while User accounts can be set up to access only the ports and features necessary to that individual.
you will find a zip folder for the v1
Accessing the connected computers is a breeze; a wide range of video and mouse sync settings ensure
KVM. In addition to including the
optimal remote session performance in any situation
applicable firmware, it contains a FW
Remote authentication support - RADIUS and LDAP/S
Notes file that will tell you how to
Supports both IPv4 and IPv6
determine which hardware version
PDU Control - Add IP PDU's as devices that can be controlled by the KVM. Assign individual ports on the
you have, and therefore, which
KVM to a PDU port to Power Cycle or Power Off/On the computer/server connected to that port.
firmware you need to use. If you have
Virtual Media allows an .iso file located in a Shared folder of a SAMBA or NFS server to be mounted to a
a v2 KVM, the latest firmware is that
Target Server and accessed as if it were directly stored on it. Virtual Media data transfer rates up to 12Mbps
which came pre-installed on the KVM.
(B078-101-USB2 required) are supported. A B078-101-USB-1 can be used to provide Virtual Media support,
but only at speeds up to 1Mbps.
Dual Serial Ports - Connect serial manageable devices such as PDU's, firewalls, and routers.
Dual Ethernet provides redundancy in the event of a crash
Built-In 19" LCD supports video resolutions up to 1366 X 768. Video resolutions up to 1920 x 1080 @ 60Hz
are supported over IP.
Supports the highest security standards for encryption ( 128-bit SSL and HTTPS )
BIOS level control to any server’s brand and model, regardless of the server condition and network
Package Includes
B070-016-19-IP 16-port KVM 19"
LCD Console
Power Cord
Rackmount hardware
Owners manual CD
Quick Start Guide
connectivity. Covers the entire spectrum of crash scenarios.
Allows for system sent messages to SNMP server to notify of LAN failures.
Event log records events that take place on the installation, such as logins, reboots, network settings changes, etc..
Allows for the installation of a SSL certificate to ensure secure transactions between the Web servers and browsers.
Access and control the KVM via the graphical remote interface, or a text based local OSD.
Flash upgradeable firmware over the network.
Standard EIA 19" rackmounting
Use in racks from 27" to 42" deep
Constructed of heavy-duty steel housing
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule Purchases
Specifications
OVERVIEW
2/4