WWSS1327CP Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – WorkWise Standing Desk-Clamp Workstation, Single-Monitor

WorkWise Standing Desk-Clamp Workstation,
Single-Monitor
MODEL NUMBER: WWSS1327CP
Description
Tripp Lite’s WWSS1327CP WorkWise™ Standing Desk-Clamp Workstation allows you to enjoy the benefits of
standing for a portion of the day without using your entire work surface. Simply clamp the WWSS1327CP to the
edge of a fixed-height desk or table from 1 to 3.35 inches thick. With a single touch, you can change the height
of the workstation to improve ergonomics, promote health and increase productivity.
Press the lever to raise or lower the pneumatic arm. All sections move together for smooth transitions between
sitting and standing. Increase tension for heavier loads or decrease it for lighter items. The arm adjusts up/down
3 inches, swivels 150° and can rotate 360° to swing the workstation out of the way when not in use (swing range
is 49.8 inches from front to back). Built-in cable management reduces cable clutter. Maximum weight capacity is
29 pounds.
Single-arm mount holds up to a 27-inch flat-panel display (VESA 75x75 or 100x100 mounting patterns). Display
can be rotated for horizontal or vertical viewing.
Highlights
Lever provides smooth one-touch
height adjustment
Swing arm provides left/right
swivel adjustment
Single-arm mount for a 13 to 27
in. flat-panel display
Max. height of keyboard tray is
14.5 in. above work surface
Maximum weight capacity is 29 lb.
Package Includes
Pneumatic arm with lever
Middle platform
Keyboard tray with wrist rest
Mount bracket
Clamp top and bottom
Support mast and (2) brackets
Post
EVA pad
Pressure plate
Cable manager and clip
Arm swivel washer
(29) M4, M6 and M8 screws
(various lengths)
(2) M8 nuts
(4) Spacers
Socket wrench
(4) Hole plugs
(3) Hex keys
Owner’s manual
Middle platform is 23.6 x 9.9 inches and keeps accessories or a small laptop within reach. At its lowest height, the platform is 1.2 inches above the work
surface. It adjusts up to 20.9 inches above the work surface.
Keyboard tray is 23.6 x 10.6 inches to hold the largest, most popular models. At its lowest height, the tray is 2.5 inches below the work surface. It adjusts up to
14.5 inches above the work surface. The wrist rest is removable. Plugs are included to fill exposed mounting holes.
Features
One-Touch Height Adjustment for Sit-Stand Ergonomics
Lever raises or lowers pneumatic arm for smooth height adjustment
Lever attaches to left or right side of keyboard tray
Sections move together for seamless sit-stand transitions
Use included hex key to increase or decrease tension according to load
1/3