U33010M Datasheet, PDF (1/2 Pages) Tripp Lite. All Rights Reserved – USB 3.0 SuperSpeed Active Extension Repeater Cable (A M-F), 10M (33-ft)

USB 3.0 SuperSpeed Active Extension Repeater
Cable (A M/F), 10M (33-ft.)
MODEL NUMBER: U330-10M
Highlights
Extend a USB 3.0 signal 33 ft.
(10 m.)
Increase the extension distance
to 66 ft. (20 m.) by connecting
two U330-10M together
Supports USB 3.0 SuperSpeed
data transfer rates up to 5Gbps
System Requirements
A USB 3.0 Computer port and
USB 3.0 device are required to
meet USB 3.0 speeds. A USB
2.0 port or device can be used,
but you will be limited to the
speeds of that port / device.
The U330-10M provides up to
120mA of power to the
Description
Tripp Lite's 33-ft. USB 3.0 active extension cable is a bus powered extension cable that can be used to increase
the length of a device cable without the worry of signal loss and potential performance problems. Increase the
extension distance to 66 ft. (20 m.) by connecting two U330-10M together. USB limits a cable's length to 16ft.
Any length above 16 feet requires the use of an active cable such as this one. This cable has a signal booster
built in. The cable must be plugged directly into a USB port (either on the PC or a hub). Use a standard 6' 10' or
15' USB 3.0 A-B cable to reach the desired distance. The U330-10M provides up to 120mA of power to the
connected device. If your device requires more than 120mA of power, an external power supply will be required.
The U330-10M accepts a 5V, 2A power supply with a 3.5 x 1.35mm DC jack. The output plug on the power
connected device. If your device
requires more than 120mA of
power, an external power supply
will be required. The U330-10M
accepts a 5V, 2A power supply
with a 3.5 x 1.35mm DC jack.
The output plug on the power
supply should have a positive tip
and a negative sleeve.
supply should have a positive tip and a negative sleeve.
Package Includes
Features
Extend a USB 3.0 signal 33 ft. (10 m.)
Increase the extension distance to 66 ft. (20 m.) by connecting two U330-10M together
10 meter ( 33-ft ) USB3.0 Super
Speed A/A Active Extension
Cable (USB-A M/F)
Works together with standard USB 3.0 cables
Provides up to 120mA of power to the connected device. If your device requires more than 120mA of power, an external power supply will be required.
Accepts a 5V, 2A power supply with a 3.5 x 1.35mm DC jack. The output plug on the power supply should have a positive tip and a negative sleeve.
Backward compatible to previous USB generations
Specifications
OVERVIEW
Cable Type
USB
OUTPUT
1/2